> The drawings for the WAF's are on page 23 (FWD) and 24 (AFT) of the
> builders
> manual, and the bit on the lower longerons is on page 14.
I am sure the drawings are on page 23, but there does not seem to be
page 23, there is page 24, it may be somewhere else in the manual, I will
have to check all the page numbers and account for. I have never undone the
ring binder, so they should not be out of order or lost.
Page 14 states, " It will be necesarry to work the cross section of the
longerons in order to obtain a good glue joint with the belly plywood" The
term "belly plywood" suggests to me the outer skin only, if the wording was
such that it stated " belly plywood and cockpit floor", then I would thiink
it would mean both. The belly of the aeroplane is one thing, and the cockpit
floor is another entity altogether. Sanding top and bottom of the longeron,
seems to leave not a lot of section left, but I suppose what is sanded away
is made up for by the ply skin, anyway, like I said, I added some spruce
wedges to the longeron and built it up to get a flush mount for the floor.
At the end of the paragraph, they state "Allow adequate cure time for the
cross members before starting the belly skin fit", the use of the word
"belly", in association with "skin", suggests that they, and the paragraph
they have written, are refering to the outer skin only. But anyway, my
interpretation of American English is not that good. How did Ken Rand fit
the floor?
Chris Johnston
North Richmond
Australia
----- Original Message -----
From: "VIRGIL N SALISBURY" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 09, 2006 12:12 AM
Subject: Re: KR> scrounging for parts
> Looks like it is time for us ALL to reread the Plans and Manual
> again, Virg
>
> On Mon, 8 May 2006 09:44:00 -0400 "Allen Wiesner "
> <[email protected]> writes:
>> >Cannot recollect any drawings for WAF's in the plans, someone told
>> me
>> >there was also a section on sanding the lower longeron flush to fit
>> the
>> >floor
>>
>> Chris:
>>
>> The drawings for the WAF's are on page 23 (FWD) and 24 (AFT) of the
>> builders
>> manual, and the bit on the lower longerons is on page 14.
>>
>> Allen G. Wiesner KR-2SS/TD S/N 1118
>> 65 Franklin Street
>> Ansonia, CT 06401-1240
>>
>> (203) 732-0508
>>
>> [email protected]
>>
>>
>>
>> _______________________________________
>> Search the KRnet Archives at
>> http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to [email protected]
>> please see other KRnet info at http://www.krnet.org/info.html
>>
>>
>
>
> Virgil N. Salisbury - AMSOIL
> www.lubedealer.com/salisbury
> Miami ,Fl
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to [email protected]
> please see other KRnet info at http://www.krnet.org/info.html
>
