I know I will get some flames over this but here is what I would do, I would
take the old ones off of my ford probe rear hatch they have leaked the gas out
evidently and they are weak I bet you could cruise the junk yards and find some
that are a bit tired. Yes I am cheap.
Mike
KR200s on
the gear
> Date: Wed, 18 Feb 2009 12:24:31 +1300
> From: [email protected]
> To: [email protected]
> Subject: KR> Gas Struts
>
> Hi Guys,
>
> I'm after some help with gas struts.
>
> I want to use gas struts for the canopy, I have 2 but the pressure is too
> high. Apparenty you can increase the pressure but most struts you cannot
> reduce the pressure. With the struts that you can reduce the presure there is
> a valve in one end but these do not have the valve.
>
> I am thinking of drilling hole & welding in a valve from a vehicle tube has
> anyone out there tried this & how did you get on. I only want about 10 -20
> PSI.
>
> Many thanks
>
> Robin
>
>
> New Zealand.
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to [email protected]
> please see other KRnet info at http://www.krnet.org/info.html
_________________________________________________________________
Want to do more with Windows Live? Learn ?10 hidden secrets? from Jamie.
http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
