The best way to heat treat an engine mount is to take a welding torch in one hand and a long handled magnet in the other. With the engine mount secured and a carburizing flame on the torch apply heat to the welded area until it becomes non magnetic, remove the flame and let it cool down gradually. The metal will glow to a dull red when the local magnetism ceases. Do this with each welded joint to relieve internal stresses.
Joe Beyer Scappoose, Ore. Message: 3 List-Post: [email protected] Date: Mon, 22 Nov 2010 17:01:20 -0700 From: DAN INA GLANDT <[email protected]> Subject: KR> heat treating engine mount To: <[email protected]> Message-ID: <[email protected]> Content-Type: text/plain; charset="iso-8859-1" What are your thoughts on the need to have an engine mount of 4130 that has been TIG welded normalized? Dan
