Here is the part http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160665003749&ssPageName=ADME:L:OC:US:1123
got to wait a couple weeks now. Joe On Tue, Oct 18, 2011 at 6:44 AM, Jose Fuentes <jose.fuen...@gmail.com>wrote: > I found and purchased a wire wound one on eBay for $9 delivered. 25w 0 > to 10 ohm exactly like what AS sells for 35. > > Joe > > Sent from my Windows Phone > From: Roger > Sent: 10/18/2011 6:29 AM > To: KRnet > Subject: Re: KR> POT OHM OR K? > Joe, a lot depends on the circuit that it's in, but for experimental > purposes with your result sofar, try a 5kOhm linear taper and if that > still doesn't do enough, try a 2kOhm. You may need to use a wirewound > pot rather that plastic depending on how much current you are dissipating. > Cheers, Roger > > On 2:59 PM, Jose Fuentes wrote: > > Hi everyone, > > > > does anyone recommend a good POT OHM/K value for use as a dimmer? I got a > > 10k one and well I have to go to the very end to get it to go on and I > have > > very little room (very fine turn) to dimm while I have 75% of the turn > that > > does nothing. > > > > Was trying to remember my electronics information, I think it's the > higher > > the resistance the more adjustment I will get so if 10k isn't enough > maybe > > 20-30k? > > > > Though I could be wrong, granted they seem to have started out at 10k on > the > > store I got it from. > > > > Joe > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- Jose Fuentes Founding Father (one of and former Vice Prez) of Capital City.NET User's Group Former Microsoft MVP http://blogs.aspadvice.com/jfuentes
