I built my KR2 wings etc., with Vinylester Resin but I had to do smaller areas because it set up kind of fast. I used small wax free 4" paper mixing cups and mixed the resin & hardener as needed for that area I was glassing at the time. Would of been neat to have a one hour set up time with Vinylester. But it was easy to work with and burns down into it self ... I thank I had 2- 2 liter bottles of Resin on hand when I started gluing my wings but that has been along time ago...
Happy New Year! John On Sat, 31 Dec 2011 00:58:18 +0000 (UTC) cruz...@frontiernet.net writes: > > I am wondering how much Aeropoxy I will need for wing > construction on my KR2S. How much should I have on hand while laying > up the fiberglass ? I plan just one layer of glass at a time with > peel-ply.Is there is a method to figure how much to mix for a given > area ? From previous experience with the older type Rand resins ,I > always seemed to have extra resin gone to waste. Also is the one > hour hardener enough time to wet out one layer of glass? I'm > thinking it's plenty of time with this lower viscosity type resin. > > Happy New Year > > Joe Cruz > KR2S > Spencer,NY > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > ____________________________________________________________ 57 Year Old Looks 27 Local Woman Reveals Wrinkle Secret That Has Doctors Angry. http://thirdpartyoffers.juno.com/TGL3141/4eff3bd3ad1b0fc092m02duc
