Hi larry, Is you 0-200 installed with 4 or 8 3/8 bolts trhough the firewall? Stef
> Op 8 februari 2017 om 0:48 schreef Larry Flesner via KRnet > <[email protected]>: > > > At 05:02 PM 2/7/2017, you wrote: > >Can I use the 5/16 AN bolts for the engine mount? Is > >this strong enough? > >Thanks > >Stef > >+++++++++++++++++++++++++++++++++++++++++ > > Find the chart for the bolts you intend to use (such as > http://www.almabolt.com/pages/catalog/bolts/proofloadtensile.htm ) > and check the tensile strength. I'm betting that many other airframe > parts will fail before a good quality bolt lets go. It's been many > years ago but I recall using standard aircraft bolts from Wick's in > 3/8" size of the correct length for my mount for the > 0-200. Important to put a crush plate on each side of the firewall > as to not crush the wood. > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
