On 8/4/2018 1:31 AM, Stef den Boer via KRnet wrote:
The master relay I have installed getting very hot.
I think you do have something wrong somewhere. The data sheet says it
will handle 80 amps continuous.
Check the drawing at
http://www.aircraftspruce.com/catalog/pdf/11-03161draw.pdf to insure it
is wired correctly. The battery source should hook to the "BAT"
terminal, the other terminal to the "load" and you "ground" the coil
terminal to energize the relay.
An yes, for the price I'd get a new one. No way to tell what damage the
heat has caused. You don't want it to fail at some point in flight.
Search the KRnet Archives at https://firstname.lastname@example.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org