Thanks for the responce.
I checked the wiring again, no faults. Than I hooked up the master switch 
wiring directly from the bat, but stil after 15 min hot and smelly. 
I will order a new one.
Stef

> Op 4 augustus 2018 om 8:31 schreef Stef den Boer via KRnet 
> <krnet@list.krnet.org>:
> 
> 
> Hi all,
> 
> The master relay I have installed getting very hot. That hot that hot that 
> you can smel it a bit and you can not put your hand on it for 2 second. If 
> you do it longer you will burn it.
> 
> I have hoked it up directly from the battery but no better result.
> 
> http://www.aircraftspruce.com/catalog/elpages/masterrelay.php?clickkey=3575
> 
> 
> Did I damaged the relay by wrong installation? I did the starter current via 
> the relay.....
> 
> Should I order a new one?
> 
> Someone experience?
> 
> Thanks Stef
> 
> Steph and his dad are building the KR-2S see 
> http://www.masttotaalconcept.nl/kr2 http://www.masttotaalconcept.nl/kr2
> _______________________________________________
> Search the KRnet Archives at 
> https://www.mail-archive.com/krnet@list.krnet.org/.
> Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
> options.
> To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

Reply via email to