On 8/26/2018 6:20 PM, Lee Shook via KRnet wrote:
Hello gentlemen, newbe to the forum, bought a kr2s that has three mall areas 
the size of a mans hand where the fiberglass has delaminated from the foam 
composite. What product does a person use to adhere the fiberglass to the foam 
to repair these areas? Thks in advance


IF, IF, IF, these delaminated spots are not in contact with wood structure anywhere (spars), strictly foam, and IF they can be pressed flat, then I'd inject some epoxy, using a syringe, under the glass, press flat, and let cure.  A number of KR's I've seen have some small "bubbles" appear that seem to be caused by poor adhesion and foam gassing.  Some times they go away on their own, sometimes not, and the owner just flies it that way.

As always. your results may vary................

Larry Flesner

Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

Reply via email to