I have cut the fiberglass out, have the pink foam showing, just wondering what I use to adhere to the foam then fiberglass over top, I put resin on the foam and it started to deform. Kinda at a stand still.
Sent from my iPhone > On Aug 26, 2018, at 5:16 PM, Flesner via KRnet <[email protected]> wrote: > >> On 8/26/2018 6:20 PM, Lee Shook via KRnet wrote: >> Hello gentlemen, newbe to the forum, bought a kr2s that has three mall areas >> the size of a mans hand where the fiberglass has delaminated from the foam >> composite. What product does a person use to adhere the fiberglass to the >> foam to repair these areas? Thks in advance > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > IF, IF, IF, these delaminated spots are not in contact with wood structure > anywhere (spars), strictly foam, and IF they can be pressed flat, then I'd > inject some epoxy, using a syringe, under the glass, press flat, and let > cure. A number of KR's I've seen have some small "bubbles" appear that seem > to be caused by poor adhesion and foam gassing. Some times they go away on > their own, sometimes not, and the owner just flies it that way. > > As always. your results may vary................ > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
