So after several weeks of frustration and not being able to figure out why
our corvair powered kr2 would not start I finally got it figured out! And
now the engine starts and seems to run just fine.

Apparently there are multiple things that can prevent an engine from
starting... But not grounding the distributor is a big one... I had checked
that the distributor was grounded statically but apparently without a
direct wire to ground the distributor it will lose significant strength
dynamically. Without that ground the engine will appear to have spark and
will think about running but will never actually start!

Thanks for all the suggestions at the gathering! It paid off and allowed it
to work! Now to move on to the next step!

Brendan and Allie

Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change 
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org

Reply via email to