Thanks Sid Mark Jones [email protected]
> On Mar 10, 2020, at 3:19 PM, Sid Wood via KRnet <[email protected]> wrote: > > I cracked the Plexiglas on the edge while cutting with a Dremel abrasive > disc for my KR-2. A touch drop of Acetone at the edge welded the crack shut. > No further problems. > Be sure to polish the entire cut edge smooth so you don't have any stress > risers to propagate when you get vibrations in flight. > > Sid Wood > [email protected] > California, MD, USA > --------------------------------------------------------------------------------------------- > > Dear KR Gods. Please watch over me as I begin the cut on my canopy to make > the door. Please keep your hands on mine as I slowly proceed with this > endeavor and make my cuts straight and true. Yeehaaaaaa to the gods. Amen > > Mark Jones > [email protected] > > > ------------------------------ > **** > > > _______________________________________________ > Search the KRnet Archives at > https://www.mail-archive.com/[email protected]/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
