On 11/2/2020 3:42 PM, Jeff Scott via KRnet wrote:
You'll just have to fabricate new attach fittings for the rear spars. The
forward sweep of the aft spar in the wing is different with the Diehl skins
from the plans configuration, so the rear spar attach fittings don't line up
properly. At least that was my experience. You really need nothing more than
some straps of 4130 the same size as the ones called out in the plans and a
drill press to drill the holes.
-Jeff Scott
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
As the original fittings have a slight bend and the new fittings would
be identical with a slightly greater bend, could the original fittings
be bent to match the new fittings? Just wondering..........
Larry Flesner
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
