Wrap a 3 ΒΌ inch wide strip of aluminum entirely around the wing from the trailing edge around the leading edge and back to the trailing edge. Then you will have to decide how to fasten the two ends together. I have seen a sort of aluminum box pop riveted to one end with sheet metal screws holding the two ends together.
Sent from Mail for Windows From: Spongadi Sent: Monday, October 18, 2021 6:51 PM To: KRnet Subject: KR>Gap between wings. Dear friends, I am interesting with instructions/photos for how to cover the gap between the center wing and the outer wing. Thanks in advance, Shahar -- Dr Tsabari Shahar This email contain confidential and/or privileged information. If you are not the intended recipient (or have received this email in error) please notify the sender immediately and destroy this email. Any unauthorized copying, disclosure or distribution of the material in this email is strictly forbidden. ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/[email protected]/ ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/[email protected]/
