Le dim. 7 nov. 2021 à 16:21, jean paul GLOTIN <[email protected]> a écrit :
> > Le dim. 7 nov. 2021 à 16:17, jean paul GLOTIN <[email protected]> > a écrit : > >> May .be this book could hello you >> >> Le sam. 6 nov. 2021 à 20:43, Chris Kinnaman <[email protected]> a écrit : >> >>> What exactly do you mean by "strip"? The plastic/fiber in AN364 & AN365 >>> nuts is supposed to just drag on the threads of the bolts enough to keep >>> the nuts from spinning freely. The fiber is not intended to bear any >>> load. >>> >>> Chris K >>> >>> On 11/6/2021 12:21 PM, Brett Lombardi wrote: >>> > KR builders, >>> > Attempting to torque the AN bolts that attach the brackets to the main >>> and >>> > rear spars. The nylon in the nuts strip with minimal pressure, ie. 12 >>> > lbs/sq ft. >>> > Anyone else have this issue and/or advice? >>> > Thanks, >>> > Brett >>> > ______ >>> ________________________________ >>> -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html >>> -Change list delivery options at >>> https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info >>> Board >>> -Search recent KRnet Archives at >>> https://list.krnet.org/empathy/list/krnet.list.krnet.org/ >>> -Search >>> <https://list.krnet.org/empathy/list/krnet.list.krnet.org/-Search> John >>> Bouyea's decades of archive at >>> https://www.mail-archive.com/[email protected]/ >>> >> ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Bouyea's decades of archive at https://www.mail-archive.com/[email protected]/
