On 8/10/2026 10:53 AM, Nelson Craig wrote:
Thanks for all the advice, specifically about the taxi and first flight.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Nelson,

I got to play with the stick of a Bell 206 years ago and if you can fly a helicopter you can certainly fly a KR.  Treat it similar.

I would advise  going SOLO on the first flight.  With two on board a standard KR2, both of you probably at or above the "average passenger weight" , I suspect your flight C.G. will be approaching the rear limits.  That will cause your stick forces to go from "light" to "zero" and stability to near zero or negative. If things go sourer at that point Luis' presence will be of little value to you.  Get used to the airplane before you start testing passenger weight you're comfortable with.   After you have a minute or two in the air, engine performance will be your primary concern.  Flying the KR at that point will seem second nature to you.

I've never been comfortable with the rule change to allow two on board a small single engine airplane on first flight.  It was primarily enacted to minimize "loss of control" accidents.  So now you allow someone to make the first flight on a light weight airplane, unknown engine reliability, unverified flight stability, at probably near gross weight with probably a rear C.G. location for the flight, and if things go wrong you stand the chance of killing two people instead of one.  If the intended PIC is not qualified to make the flight solo then have someone else do the flight.  I would rather see a "rule" for first flights on a new aircraft be along the lines of "minimum of 250 flight hours flight time, 50 hours in the last 12 months, and maybe 5 recent hours in a model with similar handling characteristics. "  To many builders fly just enough to keep current during the  years of building and then make the first flight with very rusty flying skills in a totally unproven airplane.  Disaster waiting with only a date and time missing.  With no disrespect intended to anyone,  there is no hint of "common sense" attached to any event where taxing an airplane without wings to a speed where it wants to fly.

Here is my advise to anyone making the first flight on any aircraft:  Complete the airplane to the point it is ready for first flight.  Test ground handling on taxiways initially and only move beyond the "hold short" line on a runway when a known first flight is possible.  Limit fast taxi test on the runway to 30 mph monitored with GPS, not ASI.  If the airplane is easily controlled to 30 mph, cut power and come to a stop,  you're ready for first flight.  Never cross the "hold short" line to enter the runway without every item ready for first flight, fuel, control function, seat belts, canopy latched, and whatever else would keep you from making a first flight.

I once ferried a side by side "Champ" , I forgot the model number, from a grass strip without a checkout.  My intention was to test directional stability before flight.  I line up, added power, brought up the tail, and Da*n, I was airborne!!  Even if it is not planned, treat every trip to the runway as a first flight event.

Making the first flight on any airplane will remain a life-long memory.  Approach it so the memory is a pleasant one.

Larry Flesner

--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet

Reply via email to