On 8/10/2026 3:08 PM, Nelson Craig wrote:
Lots of great comments here and Larry, I like the way to described how to 
determine approach speed.  You echoed my concern about flying dual in my plane 
because I know the CG would be an issue.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

While I managed 50+ years of flying and was honored with the FAA "Master Pilot Award" at one of our KR Gatherings, that bit of aviation knowledge I gained from aviators wiser than me.  I think it is standard practice.  I'm simply passing it along.

Two of my least understood aviation practices are why pilots are hesitant to lean the mixture and why pilots are hesitant to use abundant amounts of carb heat.  A friend of mine with an RV10 had two forced landings, the second in a bean field, because a lifetime of flying Lycombing engines he was not in the habit of using carb heat on a precautionary / regular basis.  Both times he was tooling around at 8000 feet with a low power setting, throttled back to idle while descending 5k or 6K feet, and when he added power the engine stumbled and died.  The first time he was lucky and landed on a grass strip, waited several minutes, restarted the engine and flew home.  The second time, the same location, he didn't quite make the strip.  Proper leaning is good on the engine and the only downside of carb heat is a very slight loss of power.

Your purchase of the KR has created more activity on the KRnet then I've seen in several years.  There is a great deal of knowledge hiding in the bushes of the KRnet.  The only dumb questions are the one you don't know the answers to and fail to ask.

Good luck and keep us posted.

Larry Flesner

--
KRnet mailing list
[email protected]
https://list.krnet.org/mailman/listinfo/krnet

Reply via email to