Sheng Yang wrote:
> On Tuesday 20 January 2009 18:41:21 Alexander Graf wrote:
>
>> Marcelo Tosatti wrote:
>>
>>> On Thu, Jan 15, 2009 at 03:20:06PM +0800, Sheng Yang wrote:
>>>
>>>>> + * Since reinjection is not rate-limited, use the delay
>>>>> + * to inject the last interrupt as an estimate.
>>>>> + */
>>>>> + if (unlikely(atomic_read(&apic->timer.pending) > 0)) {
>>>>> + remaining = apic->timer.injection_delay;
>>>>> + if (ktime_to_ns(remaining) > apic->timer.period)
>>>>> + remaining = ns_to_ktime(apic->timer.period);
>>>>> + } else
>>>>> + remaining = hrtimer_expires_remaining(&apic->timer.dev);
>>>>>
>>>> A little doubt...
>>>>
>>>> A: time_fire
>>>> B: intr_post
>>>> C: read TMCCT
>>>>
>>>> The sequence can be ABC or ACB.
>>>>
>>>> injection_delay = time(B) - time(A)
>>>>
>>>> So it didn't count time from read TMCCT... And guest get interrupt at
>>>> time(B), not quite understand why time(B) - time(A) matters here...
>>>>
>>> Its an estimate of the delay it takes to inject an interrupt to the
>>> guest once fired. Its only used if there have been accumulated ones, so
>>> ACB sequence with pending=0 will use hrtimer_expires_remaining().
>>>
>>>
>>>> I think the reasonable here means, this interval is usable later after
>>>> the accumulated interrupts are injected. From this point of view, I
>>>> think current solution is reasonable. It just assume the delayed
>>>> interrupts have been injected.
>>>>
>>>> However, seriously, any value here is wrong, no elegant one.
>>>>
>>> I agree.
>>>
>>>
>>>> But I still prefer to the current solution...
>>>>
>>> Why? The proposed version is smaller and simpler than the current
>>> one IMO, and also not vulnerable to whatever bug is causing now <
>>> last_update.
>>>
>>> And more precise, since the current scheme uses interrupt injection time
>>> as if it was "count-down restart" time, which is not true.
>>>
>>>
>>>> And here is not the really problem for now I think. The current
>>>> mechanism is mostly OK, but where is the bug... We have either have a
>>>> simple fix(e.g. if now < last_update, then return 0) or dig into it. Did
>>>> it worth a try? Anyway, it would return a buggy result if we have
>>>> pending interrupts...
>>>>
>>> The overflow calculation is not necessary as discussed. Alexander, can
>>> you please try the following? Sheng, do you have any other suggestion to
>>> test?
>>>
>>> /proc/timer_list output of the host when ESX is running too.
>>>
>> Sorry for the late reply. Here's the dmesg output and /proc/timer_list
>> after the issue occured. I left the warning message in that I put there
>> in case the value is too high:
>>
>> counter_passed = div64_u64(ktime_to_ns(passed),
>> (APIC_BUS_CYCLE_NS *
>> apic->timer.divide_count));
>>
>> + if (counter_passed > 0x7f00000000000000) {
>> + /* If we're in here we probably encountered a bug! */
>> + printk(KERN_INFO "LAPIC: Too high counter_passed value:
>> 0x%lx | 0x%lx (0x%lx) | 0x%lx (0x%lx)\n", counter_passed,
>> ktime_to_ns(passed), passed, now.tv64, apic
>> ->timer.last_update.tv64);
>> + }
>> +
>> if (counter_passed > tmcct) {
>> if (unlikely(!apic_lvtt_period(apic))) {
>> /* one-shot timers stick at 0 until reset */
>>
>>
>>
>> start_apic_timer: bus cycle is 1ns, now 0x00039a6f377cfbc4, timer
>> initial count 0x186a0, period 100000ns, expire @ 0x00039a6f377e8264.
>> start_apic_timer: bus cycle is 1ns, now 0x00039a6f3a7b5aef, timer
>> initial count 0x203a0, period 132000ns, expire @ 0x00039a6f3a7d5e8f.
>> last_update = 1014860818546063 now = 1014860818426085
>> rec[47] when=1014860811948512 last_update=1014860812078063 pend=0
>> rec[46] when=1014860818417773 last_update=1014860818546063 pend=0
>> rec[45] when=1014860818285454 last_update=1014860818414063 pend=0
>> rec[44] when=1014860818153119 last_update=1014860818282063 pend=0
>> rec[43] when=1014860818021746 last_update=1014860818150063 pend=0
>> rec[42] when=1014860817889326 last_update=1014860818018063 pend=0
>> rec[41] when=1014860817757297 last_update=1014860817886063 pend=0
>> rec[40] when=1014860817625682 last_update=1014860817754063 pend=0
>> rec[39] when=1014860817492484 last_update=1014860817622063 pend=0
>> rec[38] when=1014860817360531 last_update=1014860817490063 pend=0
>> rec[37] when=1014860817228489 last_update=1014860817358063 pend=0
>> rec[36] when=1014860817101250 last_update=1014860817226063 pend=0
>> rec[35] when=1014860816964378 last_update=1014860817094063 pend=0
>> rec[34] when=1014860816832459 last_update=1014860816962063 pend=0
>> rec[33] when=1014860816700514 last_update=1014860816830063 pend=0
>> rec[32] when=1014860816568558 last_update=1014860816698063 pend=0
>> rec[31] when=1014860816436510 last_update=1014860816566063 pend=0
>> rec[30] when=1014860816305079 last_update=1014860816434063 pend=0
>> rec[29] when=1014860816172560 last_update=1014860816302063 pend=0
>> rec[28] when=1014860816040449 last_update=1014860816170063 pend=0
>> rec[27] when=1014860815908500 last_update=1014860816038063 pend=0
>> rec[26] when=1014860815776451 last_update=1014860815906063 pend=0
>> rec[25] when=1014860815644499 last_update=1014860815774063 pend=0
>> rec[24] when=1014860815513100 last_update=1014860815642063 pend=0
>> rec[23] when=1014860815380476 last_update=1014860815510063 pend=0
>> rec[22] when=1014860815248609 last_update=1014860815378063 pend=0
>> rec[21] when=1014860815116494 last_update=1014860815246063 pend=0
>> rec[20] when=1014860814984441 last_update=1014860815114063 pend=0
>> rec[19] when=1014860814852498 last_update=1014860814982063 pend=0
>> rec[18] when=1014860814721082 last_update=1014860814850063 pend=0
>> rec[17] when=1014860814588467 last_update=1014860814718063 pend=0
>> rec[16] when=1014860814456530 last_update=1014860814586063 pend=0
>> rec[15] when=1014860814324452 last_update=1014860814454063 pend=0
>> rec[14] when=1014860814192601 last_update=1014860814322063 pend=0
>> rec[13] when=1014860814060489 last_update=1014860814190063 pend=0
>> rec[12] when=1014860813928546 last_update=1014860814058063 pend=0
>> rec[11] when=1014860813797571 last_update=1014860813926063 pend=0
>> rec[10] when=1014860813664475 last_update=1014860813794063 pend=0
>> rec[9] when=1014860813532520 last_update=1014860813662063 pend=0
>> rec[8] when=1014860813400463 last_update=1014860813530063 pend=0
>> rec[7] when=1014860813268519 last_update=1014860813398063 pend=0
>> rec[6] when=1014860813136452 last_update=1014860813266063 pend=0
>> rec[5] when=1014860813007312 last_update=1014860813134063 pend=0
>> rec[4] when=1014860812872314 last_update=1014860813002063 pend=0
>> rec[3] when=1014860812740791 last_update=1014860812870063 pend=0
>> rec[2] when=1014860812652998 last_update=1014860812738063 pend=0
>> rec[1] when=1014860812476526 last_update=1014860812606063 pend=0
>> rec[0] when=1014860812344635 last_update=1014860812474063 pend=0
>> rec[49] when=1014860812213098 last_update=1014860812342063 pend=0
>> rec[48] when=1014860812080466 last_update=1014860812210063 pend=0
>> LAPIC: Too high counter_passed value: 0x7ffffffffffe2b55 |
>> 0x7ffffffffffe2b55 (0x7ffffffffffe2b55) | 0x39b02b29428e5 (0x39b02b295fd8f)
>> start_apic_timer: bus cycle is 1ns, now 0x00039b02b2998ada, timer
>> initial count 0x8400, period 33792ns, expire @ 0x00039b02b29a0eda.
>>
>>
>
> Thanks, Alex!
>
> When update time of last_update is 0x39B02B29428E5, and the start_apic_timer
> at 0x00039b02b2998ada, the delta is 0x561F5 = 352,757, very close. Looks like
> a window here?:
>
>
>> static void start_apic_timer(struct kvm_lapic *apic)
>> {
>> ktime_t now = apic->timer.dev.base->get_time();
>>
>> apic->timer.last_update = now;
>>
>
> [window?]
>
>> apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
>> APIC_BUS_CYCLE_NS * apic->timer.divide_count;
>> atomic_set(&apic->timer.pending, 0);
>>
>> if (!apic->timer.period)
>> return;
>>
>> hrtimer_start(&apic->timer.dev,
>> ktime_add_ns(now, apic->timer.period),
>> HRTIMER_MODE_ABS);
>>
>> apic_debug("%s: bus cycle is %" PRId64 "ns, now 0x%016"
>> PRIx64 ", "
>> "timer initial count 0x%x, period %lldns, "
>> "expire @ 0x%016" PRIx64 ".\n", __func__,
>> APIC_BUS_CYCLE_NS, ktime_to_ns(now),
>> apic_get_reg(apic, APIC_TMICT),
>> apic->timer.period,
>> ktime_to_ns(ktime_add_ns(now,
>> apic->timer.period)));
>> }
>>
>
> Looks like due to the period is reduced, but the last_update use old value
> and
> got just updated... But guest vcpu B program vcpu A's lapic? Or intr_post of
> vcpu B happened at vcpu A? Both seems unreasonable...
>
> Alex, can you help to add another line above to confirm the problem? e.g.
>
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index afac68c..15f8ed5 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -653,6 +653,8 @@ static void start_apic_timer(struct kvm_lapic *apic)
> {
> ktime_t now = apic->timer.dev.base->get_time();
>
> + printk("enter start_apic_timer! vcpu %d\n", apic->vcpu->vcpu_id);
> +
> apic->timer.last_update = now;
>
> apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
>
> Also add a similar one at the beginning of print_last_update_record().
>
> Thanks! (And thanks for Marcelo's excellent debug patch! :) )
>
>
The VMware ESX VM is UP, so I don't think we'll get anything from the
vcpu_id apart from 0 :-). Nevertheless here's the dmesg output:
enter start_apic_timer! vcpu 0
enter start_apic_timer! vcpu 0
start_apic_timer: bus cycle is 1ns, now 0x00039fb339714386, timer
initial count 0x186a0, period 100000ns, expire @ 0x00039fb33972ca26.
enter start_apic_timer! vcpu 0
start_apic_timer: bus cycle is 1ns, now 0x00039fb33c58ebc2, timer
initial count 0x203a0, period 132000ns, expire @ 0x00039fb33c5aef62.
last_update = 1020361050214818 now = 1020361050178604
enter print_last_update_record! vcpu 0
rec[5] when=1020361043617361 last_update=1020361043746818 pend=0
rec[4] when=1020361050088268 last_update=1020361050214818 pend=0
rec[3] when=1020361049970143 last_update=1020361050082818 pend=0
rec[2] when=1020361049822220 last_update=1020361049950818 pend=0
rec[1] when=1020361049690023 last_update=1020361049818818 pend=0
rec[0] when=1020361049559209 last_update=1020361049686818 pend=0
rec[49] when=1020361049427469 last_update=1020361049554818 pend=0
rec[48] when=1020361049294815 last_update=1020361049422818 pend=0
rec[47] when=1020361049162401 last_update=1020361049290818 pend=0
rec[46] when=1020361049030431 last_update=1020361049158818 pend=0
rec[45] when=1020361048898352 last_update=1020361049026818 pend=0
rec[44] when=1020361048765413 last_update=1020361048894818 pend=0
rec[43] when=1020361048634310 last_update=1020361048762818 pend=0
rec[42] when=1020361048501343 last_update=1020361048630818 pend=0
rec[41] when=1020361048369388 last_update=1020361048498818 pend=0
rec[40] when=1020361048241616 last_update=1020361048366818 pend=0
rec[39] when=1020361048108017 last_update=1020361048234818 pend=0
rec[38] when=1020361047973826 last_update=1020361048102818 pend=0
rec[37] when=1020361047841371 last_update=1020361047970818 pend=0
rec[36] when=1020361047709322 last_update=1020361047838818 pend=0
rec[35] when=1020361047577366 last_update=1020361047706818 pend=0
rec[34] when=1020361047445316 last_update=1020361047574818 pend=0
rec[33] when=1020361047313423 last_update=1020361047442818 pend=0
rec[32] when=1020361047181310 last_update=1020361047310818 pend=0
rec[31] when=1020361047049990 last_update=1020361047178818 pend=0
rec[30] when=1020361046917375 last_update=1020361047046818 pend=0
rec[29] when=1020361046785332 last_update=1020361046914818 pend=0
rec[28] when=1020361046653374 last_update=1020361046782818 pend=0
rec[27] when=1020361046521325 last_update=1020361046650818 pend=0
rec[26] when=1020361046389374 last_update=1020361046518818 pend=0
rec[25] when=1020361046257989 last_update=1020361046386818 pend=0
rec[24] when=1020361046125335 last_update=1020361046254818 pend=0
rec[23] when=1020361045993393 last_update=1020361046122818 pend=0
rec[22] when=1020361045861330 last_update=1020361045990818 pend=0
rec[21] when=1020361045729389 last_update=1020361045858818 pend=0
rec[20] when=1020361045602604 last_update=1020361045726818 pend=0
rec[19] when=1020361045471032 last_update=1020361045594818 pend=0
rec[18] when=1020361045333385 last_update=1020361045462818 pend=0
rec[17] when=1020361045201397 last_update=1020361045330818 pend=0
rec[16] when=1020361045074634 last_update=1020361045198818 pend=0
rec[15] when=1020361044941707 last_update=1020361045066818 pend=0
rec[14] when=1020361044805373 last_update=1020361044934818 pend=0
rec[13] when=1020361044673417 last_update=1020361044802818 pend=0
rec[12] when=1020361044547848 last_update=1020361044670818 pend=0
rec[11] when=1020361044409439 last_update=1020361044538818 pend=0
rec[10] when=1020361044277316 last_update=1020361044406818 pend=0
rec[9] when=1020361044150456 last_update=1020361044274818 pend=0
rec[8] when=1020361044013204 last_update=1020361044142818 pend=0
rec[7] when=1020361043881203 last_update=1020361044010818 pend=0
rec[6] when=1020361043749913 last_update=1020361043878818 pend=0
LAPIC: Too high counter_passed value: 0x7fffffffffff7289 |
0x7fffffffffff7289 (0x7fffffffffff7289) | 0x3a00351f0442c (0x3a00351f0d1a2)
enter start_apic_timer! vcpu 0
start_apic_timer: bus cycle is 1ns, now 0x0003a00351f37054, timer
initial count 0x8400, period 33792ns, expire @ 0x0003a00351f3f454.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
