On Tue, Jun 30, 2009 at 11:59:15PM -0400, Beth Kon wrote:
>
> +#ifdef BX_QEMU
> +void irq0_override_probe(void)
> +{
> + if(qemu_cfg_port) {
> + qemu_cfg_select(QEMU_CFG_IRQ0_OVERRIDE);
> + qemu_cfg_read(&irq0_override, 1);
> + return;
Drop return here.
> + }
> +}
> +#endif
> +
> void cpu_probe(void)
> {
> uint32_t eax, ebx, ecx, edx;
> @@ -1153,7 +1168,14 @@ static void mptable_init(void)
> putstr(&q, "0.1 "); /* vendor id */
> putle32(&q, 0); /* OEM table ptr */
> putle16(&q, 0); /* OEM table size */
> +#ifdef BX_QEMU
> + if (irq0_override)
> + putle16(&q, MAX_CPUS + 17); /* entry count */
> + else
> + putle16(&q, MAX_CPUS + 18); /* entry count */
> +#else
> putle16(&q, MAX_CPUS + 18); /* entry count */
> +#endif
> putle32(&q, 0xfee00000); /* local APIC addr */
> putle16(&q, 0); /* ext table length */
> putb(&q, 0); /* ext table checksum */
> @@ -1197,6 +1219,13 @@ static void mptable_init(void)
>
> /* irqs */
> for(i = 0; i < 16; i++) {
> +#ifdef BX_QEMU
> + /* One entry per ioapic interrupt destination. Destination 2 is
> covered
> + * by irq0->inti2 override (i == 0). Source IRQ 2 is unused
> + */
> + if (irq0_override && i == 2)
> + continue;
> +#endif
> putb(&q, 3); /* entry type = I/O interrupt */
> putb(&q, 0); /* interrupt type = vectored interrupt */
> putb(&q, 0); /* flags: po=0, el=0 */
> @@ -1204,7 +1233,12 @@ static void mptable_init(void)
> putb(&q, 0); /* source bus ID = ISA */
> putb(&q, i); /* source bus IRQ */
> putb(&q, ioapic_id); /* dest I/O APIC ID */
> - putb(&q, i); /* dest I/O APIC interrupt in */
> +#ifdef BX_QEMU
> + if (irq0_override && i == 0)
> + putb(&q, 2); /* dest I/O APIC interrupt in */
> + else
> +#endif
> + putb(&q, i); /* dest I/O APIC interrupt in */
> }
> /* patch length */
> len = q - mp_config_table;
> @@ -1768,23 +1802,21 @@ void acpi_bios_init(void)
> io_apic->io_apic_id = smp_cpus;
> io_apic->address = cpu_to_le32(0xfec00000);
> io_apic->interrupt = cpu_to_le32(0);
> -#ifdef BX_QEMU
> -#ifdef HPET_WORKS_IN_KVM
> io_apic++;
> -
> - int_override = (void *)io_apic;
> - int_override->type = APIC_XRUPT_OVERRIDE;
> - int_override->length = sizeof(*int_override);
> - int_override->bus = cpu_to_le32(0);
> - int_override->source = cpu_to_le32(0);
> - int_override->gsi = cpu_to_le32(2);
> - int_override->flags = cpu_to_le32(0);
> -#endif
> + int_override = (struct madt_int_override*)(io_apic);
> +#ifdef BX_QEMU
> + if (irq0_override) {
> + memset(int_override, 0, sizeof(*int_override));
> + int_override->type = APIC_XRUPT_OVERRIDE;
> + int_override->length = sizeof(*int_override);
> + int_override->source = 0;
> + int_override->gsi = 2;
> + int_override->flags = 0; /* conforms to bus specifications */
> + int_override++;
> + }
> #endif
> -
> - int_override = (struct madt_int_override*)(io_apic + 1);
> - for ( i = 0; i < 16; i++ ) {
> - if ( PCI_ISA_IRQ_MASK & (1U << i) ) {
> + for (i = 0; i < 16; i++) {
> + if (PCI_ISA_IRQ_MASK & (1U << i)) {
> memset(int_override, 0, sizeof(*int_override));
> int_override->type = APIC_XRUPT_OVERRIDE;
> int_override->length = sizeof(*int_override);
> @@ -2708,6 +2740,9 @@ void rombios32_init(uint32_t *s3_resume_vector, uint8_t
> *shutdown_flag)
>
> if (bios_table_cur_addr != 0) {
>
> +#ifdef BX_QEMU
> + irq0_override_probe();
> +#endif
> mptable_init();
>
> smbios_init();
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
