Hi Alexandru,
On 2/19/21 1:13 PM, Alexandru Elisei wrote:
> The LPI code validates a result similarly to the IPI tests, by checking if
> the target CPU received the interrupt with the expected interrupt number.
> However, the LPI tests invent their own way of checking the test results by
> creating a global struct (lpi_stats), using a separate interrupt handler
> (lpi_handler) and test function (check_lpi_stats).
>
> There are several areas that can be improved in the LPI code, which are
> already covered by the IPI tests:
>
> - check_lpi_stats() doesn't take into account that the target CPU can
> receive the correct interrupt multiple times.
> - check_lpi_stats() doesn't take into the account the scenarios where all
> online CPUs can receive the interrupt, but the target CPU is the last CPU
> that touches lpi_stats.observed.
> - Insufficient or missing memory synchronization.
>
> Instead of duplicating code, let's convert the LPI tests to use
> check_acked() and the same interrupt handler as the IPI tests, which has
> been renamed to irq_handler() to avoid any confusion.
>
> check_lpi_stats() has been replaced with check_acked() which, together with
> using irq_handler(), instantly gives us more correctness checks and proper
> memory synchronization between threads. lpi_stats.expected has been
> replaced by the CPU mask and the expected interrupt number arguments to
> check_acked(), with no change in semantics.
>
> lpi_handler() aborted the test if the interrupt number was not an LPI. This
> was changed in favor of allowing the test to continue, as it will fail in
> check_acked(), but possibly print information useful for debugging. If the
> test receives spurious interrupts, those are reported via report_info() at
> the end of the test for consistency with the IPI tests, which don't treat
> spurious interrupts as critical errors.
>
> In the spirit of code reuse, secondary_lpi_tests() has been replaced with
> ipi_recv() because the two are now identical; ipi_recv() has been renamed
> to irq_recv(), similarly to irq_handler(), to avoid confusion.
>
> CC: Eric Auger <[email protected]>
> Signed-off-by: Alexandru Elisei <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Thanks
Eric
> ---
> arm/gic.c | 188 ++++++++++++++++++++++++------------------------------
> 1 file changed, 85 insertions(+), 103 deletions(-)
>
> diff --git a/arm/gic.c b/arm/gic.c
> index 8bc2a35908f2..98135ef2cb06 100644
> --- a/arm/gic.c
> +++ b/arm/gic.c
> @@ -105,13 +105,12 @@ static bool check_acked(cpumask_t *mask, int sender,
> int irqnum)
> ++missing;
> else if (acked[cpu] > 1)
> ++extra;
> - } else {
> - if (acked[cpu])
> + } else if (acked[cpu]) {
> ++unexpected;
> }
> if (!acked[cpu])
> continue;
> - smp_rmb(); /* pairs with smp_wmb in ipi_handler */
> + smp_rmb(); /* pairs with smp_wmb in irq_handler */
>
> if (has_gicv2 && irq_sender[cpu] != sender) {
> report_info("cpu%d received IPI from wrong sender %d",
> @@ -149,11 +148,12 @@ static void check_spurious(void)
> static int gic_get_sender(int irqstat)
> {
> if (gic_version() == 2)
> + /* GICC_IAR.CPUID is RAZ for non-SGIs */
> return (irqstat >> 10) & 7;
> return -1;
> }
>
> -static void ipi_handler(struct pt_regs *regs __unused)
> +static void irq_handler(struct pt_regs *regs __unused)
> {
> u32 irqstat = gic_read_iar();
> u32 irqnr = gic_iar_irqnr(irqstat);
> @@ -185,75 +185,6 @@ static void setup_irq(irq_handler_fn handler)
> }
>
> #if defined(__aarch64__)
> -struct its_event {
> - int cpu_id;
> - int lpi_id;
> -};
> -
> -struct its_stats {
> - struct its_event expected;
> - struct its_event observed;
> -};
> -
> -static struct its_stats lpi_stats;
> -
> -static void lpi_handler(struct pt_regs *regs __unused)
> -{
> - u32 irqstat = gic_read_iar();
> - int irqnr = gic_iar_irqnr(irqstat);
> -
> - gic_write_eoir(irqstat);
> - assert(irqnr >= 8192);
> - smp_rmb(); /* pairs with wmb in lpi_stats_expect */
> - lpi_stats.observed.cpu_id = smp_processor_id();
> - lpi_stats.observed.lpi_id = irqnr;
> - acked[lpi_stats.observed.cpu_id]++;
> - smp_wmb(); /* pairs with rmb in check_lpi_stats */
> -}
> -
> -static void lpi_stats_expect(int exp_cpu_id, int exp_lpi_id)
> -{
> - lpi_stats.expected.cpu_id = exp_cpu_id;
> - lpi_stats.expected.lpi_id = exp_lpi_id;
> - lpi_stats.observed.cpu_id = -1;
> - lpi_stats.observed.lpi_id = -1;
> - smp_wmb(); /* pairs with rmb in handler */
> -}
> -
> -static void check_lpi_stats(const char *msg)
> -{
> - int i;
> -
> - for (i = 0; i < 50; i++) {
> - mdelay(100);
> - smp_rmb(); /* pairs with wmb in lpi_handler */
> - if (lpi_stats.observed.cpu_id == lpi_stats.expected.cpu_id &&
> - lpi_stats.observed.lpi_id == lpi_stats.expected.lpi_id) {
> - report(true, "%s", msg);
> - return;
> - }
> - }
> -
> - if (lpi_stats.observed.cpu_id == -1 && lpi_stats.observed.lpi_id == -1)
> {
> - report_info("No LPI received whereas (cpuid=%d, intid=%d) "
> - "was expected", lpi_stats.expected.cpu_id,
> - lpi_stats.expected.lpi_id);
> - } else {
> - report_info("Unexpected LPI (cpuid=%d, intid=%d)",
> - lpi_stats.observed.cpu_id,
> - lpi_stats.observed.lpi_id);
> - }
> - report(false, "%s", msg);
> -}
> -
> -static void secondary_lpi_test(void)
> -{
> - setup_irq(lpi_handler);
> - cpumask_set_cpu(smp_processor_id(), &ready);
> - while (1)
> - wfi();
> -}
> -
> static void check_lpi_hits(int *expected, const char *msg)
> {
> bool pass = true;
> @@ -347,7 +278,7 @@ static void ipi_test_smp(void)
>
> static void ipi_send(void)
> {
> - setup_irq(ipi_handler);
> + setup_irq(irq_handler);
> wait_on_ready();
> ipi_test_self();
> ipi_test_smp();
> @@ -355,9 +286,9 @@ static void ipi_send(void)
> exit(report_summary());
> }
>
> -static void ipi_recv(void)
> +static void irq_recv(void)
> {
> - setup_irq(ipi_handler);
> + setup_irq(irq_handler);
> cpumask_set_cpu(smp_processor_id(), &ready);
> while (1)
> wfi();
> @@ -368,7 +299,7 @@ static void ipi_test(void *data __unused)
> if (smp_processor_id() == IPI_SENDER)
> ipi_send();
> else
> - ipi_recv();
> + irq_recv();
> }
>
> static struct gic gicv2 = {
> @@ -696,14 +627,12 @@ static int its_prerequisites(int nb_cpus)
> return -1;
> }
>
> - stats_reset();
> -
> - setup_irq(lpi_handler);
> + setup_irq(irq_handler);
>
> for_each_present_cpu(cpu) {
> if (cpu == 0)
> continue;
> - smp_boot_secondary(cpu, secondary_lpi_test);
> + smp_boot_secondary(cpu, irq_recv);
> }
> wait_on_ready();
>
> @@ -757,6 +686,7 @@ static void test_its_trigger(void)
> {
> struct its_collection *col3;
> struct its_device *dev2, *dev7;
> + cpumask_t mask;
>
> if (its_setup1())
> return;
> @@ -767,13 +697,21 @@ static void test_its_trigger(void)
>
> report_prefix_push("int");
>
> - lpi_stats_expect(3, 8195);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(3, &mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("dev=2, eventid=20 -> lpi= 8195, col=3");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8195),
> + "dev=2, eventid=20 -> lpi= 8195, col=3");
>
> - lpi_stats_expect(2, 8196);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(2, &mask);
> its_send_int(dev7, 255);
> - check_lpi_stats("dev=7, eventid=255 -> lpi= 8196, col=2");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8196),
> + "dev=7, eventid=255 -> lpi= 8196, col=2");
>
> report_prefix_pop();
>
> @@ -786,9 +724,12 @@ static void test_its_trigger(void)
> gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT & ~LPI_PROP_ENABLED);
> its_send_inv(dev2, 20);
>
> - lpi_stats_expect(-1, -1);
> + stats_reset();
> + cpumask_clear(&mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("dev2/eventid=20 does not trigger any LPI");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, -1, -1),
> + "dev2/eventid=20 does not trigger any LPI");
>
> /*
> * re-enable the LPI but willingly do not call invall
> @@ -796,18 +737,29 @@ static void test_its_trigger(void)
> * The LPI should not hit
> */
> gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT);
> - lpi_stats_expect(-1, -1);
> + stats_reset();
> + cpumask_clear(&mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("dev2/eventid=20 still does not trigger any LPI");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, -1, -1),
> + "dev2/eventid=20 still does not trigger any LPI");
>
> /* Now call the invall and check the LPI hits */
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(3, &mask);
> its_send_invall(col3);
> - lpi_stats_expect(3, 8195);
> - check_lpi_stats("dev2/eventid=20 pending LPI is received");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8195),
> + "dev2/eventid=20 pending LPI is received");
>
> - lpi_stats_expect(3, 8195);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(3, &mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("dev2/eventid=20 now triggers an LPI");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8195),
> + "dev2/eventid=20 now triggers an LPI");
>
> report_prefix_pop();
>
> @@ -818,9 +770,13 @@ static void test_its_trigger(void)
> */
>
> its_send_mapd(dev2, false);
> - lpi_stats_expect(-1, -1);
> + stats_reset();
> + cpumask_clear(&mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("no LPI after device unmap");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, -1, -1), "no LPI after device unmap");
> +
> + check_spurious();
> report_prefix_pop();
> }
>
> @@ -828,6 +784,7 @@ static void test_its_migration(void)
> {
> struct its_device *dev2, *dev7;
> bool test_skipped = false;
> + cpumask_t mask;
>
> if (its_setup1()) {
> test_skipped = true;
> @@ -844,13 +801,23 @@ do_migrate:
> if (test_skipped)
> return;
>
> - lpi_stats_expect(3, 8195);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(3, &mask);
> its_send_int(dev2, 20);
> - check_lpi_stats("dev2/eventid=20 triggers LPI 8195 on PE #3 after
> migration");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8195),
> + "dev2/eventid=20 triggers LPI 8195 on PE #3 after
> migration");
>
> - lpi_stats_expect(2, 8196);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(2, &mask);
> its_send_int(dev7, 255);
> - check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 after
> migration");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8196),
> + "dev7/eventid=255 triggers LPI 8196 on PE #2 after
> migration");
> +
> + check_spurious();
> }
>
> #define ERRATA_UNMAPPED_COLLECTIONS "ERRATA_8c58be34494b"
> @@ -860,6 +827,7 @@ static void test_migrate_unmapped_collection(void)
> struct its_collection *col = NULL;
> struct its_device *dev2 = NULL, *dev7 = NULL;
> bool test_skipped = false;
> + cpumask_t mask;
> int pe0 = 0;
> u8 config;
>
> @@ -894,17 +862,27 @@ do_migrate:
> its_send_mapc(col, true);
> its_send_invall(col);
>
> - lpi_stats_expect(2, 8196);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(2, &mask);
> its_send_int(dev7, 255);
> - check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8196),
> + "dev7/eventid= 255 triggered LPI 8196 on PE #2");
>
> config = gicv3_lpi_get_config(8192);
> report(config == LPI_PROP_DEFAULT,
> "Config of LPI 8192 was properly migrated");
>
> - lpi_stats_expect(pe0, 8192);
> + stats_reset();
> + cpumask_clear(&mask);
> + cpumask_set_cpu(pe0, &mask);
> its_send_int(dev2, 0);
> - check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0");
> + wait_for_interrupts(&mask);
> + report(check_acked(&mask, 0, 8192),
> + "dev2/eventid = 0 triggered LPI 8192 on PE0");
> +
> + check_spurious();
> }
>
> static void test_its_pending_migration(void)
> @@ -961,6 +939,10 @@ static void test_its_pending_migration(void)
> pendbaser = readq(ptr);
> writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr);
>
> + /*
> + * Reset and initialization values for acked are the same, so we don't
> + * need to explicitely call stats_reset().
> + */
> gicv3_lpi_rdist_enable(pe0);
> gicv3_lpi_rdist_enable(pe1);
>
>
_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
