Sorry about the delay in responding. I was a little tied up yesterday afternoon.
So you have changed the profile to keep default route, and selected "use additional network routes" right underneath that. Next you click add route, enter the remote network (the network at work) and then selected "use interface". Finally the drop down on the right side should select tun0. Click OK and the network should appear with the network, netmask and the Device of Tun0 on the screen. Click Apply and ok and give it a whirl. (if it works save the profile as well!) If your routing table still doesnt show tun0 as the default route for the remote network when you connect I supect you have some type of bug, and if I had to guess its with the vpnc itself, not the kvpnc frontend. I know that older versions of vpnc gave me problems with the routing table being all jacked up but that was a year ago and I cant imagine your running that old of a vpnc version. Bryan Stevenson wrote: > Hey Christoph, > > Thanks for the reply, but I think you missed some key bits of the > thread....so I'll add replies below ;-) > > On Fri, 2008-02-08 at 09:35 +0000, Christoph Thielecke wrote: > >> Hello, >> >> sorry for the delay but I was very busy. In general, I'm willing to >> help to >> solve the problems but maybe I need your help. >> > > No problem...whatever debug info you need...just let me know. > > >>> Yep...pretty odd behaviour (and what made me think KVPNC might not >>> >> be >> >>> handling something quite right). >>> >> Tell me whats wrong and I'll fix it. >> > > When I add an alternate route and set KVPNC to keep the default route > and use the alternate route I set (using Tun0 for the alt route) I have > a problem. Once connected to the VPN, my route table shows only the > Ath0 device in use....no Tun0. When I connect with no alternate routes > and replacing the alt route....Ath0 and Tun0 are iun use as they should > be. All my route outputs were in the post before the one you > answered....so maybe check that one for the fine details. > > >>> I know .90 fixed a lot of GUI issues >>> with adding routes, allowing routes to be edited (still a bug there >>> >> with >> >>> the mask resetting to 24 every time you bring up the edit window), >>> >> Fixed in svn now. >> > > Sweet....figured it was just defaulting regardless of being a new or > edited route. > > >>> and >>> issues with routes not being removed correctly (at least from the >>> >> GUI). >> Works fine here (Try apply after delete). >> > > This was a comment about .89 about something that .90 fixed....wasn't > saying it's happening now ;-) > > Thanks again Christoph > > Cheers > > - > > Bryan Stevenson B.Comm. > VP & Director of E-Commerce Development > Electric Edge Systems Group Inc. > phone: 250.480.0642 > fax: 250.480.1264 > cell: 250.920.8830 > e-mail: [EMAIL PROTECTED] > web: www.electricedgesystems.com > > Notice: > This message, including any attachments, is confidential and may contain > information that is privileged or exempt from disclosure. It is intended > only for the person to whom it is addressed unless expressly authorized > otherwise by the sender. If you are not an authorized recipient, please > notify the sender immediately and permanently destroy all copies of this > message and attachments. > > > > > _______________________________________________ > Kvpnc-user mailing list > [email protected] > https://mail.gna.org/listinfo/kvpnc-user > _______________________________________________ Kvpnc-user mailing list [email protected] https://mail.gna.org/listinfo/kvpnc-user
