(1) Put a low end PC with NIC in it. Place this PC next to your KXT
controller.
(2) Assigning an IP address to this PC.
Connect this PC to your office LAN. or even internet.
Make sure that you can ping this PC from your other LAN PC.
(3) Connecting this PC COM port to the KXT SMDR port.
Using the PC Hyper Term to verify that the the HyperTerm
can see the SMDR log.
(4) Download the sw from www.mft.com/phonelogger and install it
on this PC as according to the instruction on the web site.
(5) From any PC using IE browser to see the call log.
-----Original Message-----
From: Sales [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 24, 2002 5:02 PM
To: [EMAIL PROTECTED]
Subject: RE: KX-T: Serial Cable Question
Importance: High
How would I connect the phone system up to my LAN so I can use any
computer
on the network to view information>?
-----Original Message-----
From: Keith Morse [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 24, 2002 4:57 PM
To: Sales
Cc: [EMAIL PROTECTED]
Subject: Re: KX-T: Serial Cable Question
On Tue, 24 Sep 2002, Sales wrote:
> Is there a way to connect a CAT5 cable to the serial port of the phone
> system and computer? I have a long run, about 30-50 feet from
computer to
> phone system and a serial cable just isn't going to cut it. Any
ideas?
In addition to the other comments, many electrical/electronic supply
houses supply "unprogrammed" DB9/DB25 <-> RJ-45 hoods that you can use
to
connect the CAT 5 cable.
_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
