Hi All, We just moved our old KX-T123211D out of the picture and replaced it with a KX-TD1232-6. But now our TVS200 is giving us overly-loud, noisy, scratchy, crackly voicemail prompts. Whether we call it from another extension or from an outside line coming in.
We were only using two KX-TVS102 cards previously in Inband mode, but added a KX-TVS204 card in the mix when we made the change-over to the new PBX. We moved the KX-TVS102 cards to slots two and three on the TVS200. And put the KX-TVS204 card in slot one. We also went into the settings of the TVS200 and changed it over to KX-TD1232 and the TVS200 is now in D-PITS mode. Other info: We're connecting the TVS200 to the KX-TD1232-6 on jacks 9, 10, 11 and 12 (starting on PBX jack 9 with ports 1 and 2 (both in the left-side jack) on the KX-TVS204 that's in slot 1 on the TVS200). Which are setup as voicemail ports in the PBX. And all eight TVS200 ports function fine as programmed - all except this audio issue. 8-| Everything is (almost) working perfectly; i.e. Everything rings; answers; and does its job as expected. However, as stated above, the TVS200 is giving us overly-loud, noisy, scratchy, crackly voicemail prompts. And it won't take DTMF input. (Probably because its so loud and crackly it can't hear our touch-tone input.) Murphy's Law. Something had to go wrong. It was all going so perfect. Up until... :-\ Has anyone else seen this issue? Thanks in advance and Happy New Year! Cheers, Steve Diederich mailto:[EMAIL PROTECTED] _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
