Hi all. I have installed a TVP50CE at a customer. Uploaded new danish language and dedicated the mailboxes for every user. And made a qsetup on the TVP50. The system wich it is installed to is a doubble cabinet KX-TD1232NE with 4 x 8 ekstra hybrid pots(KX-TD170NE), PRI ISDN (KX-TD290CE)with 20 channels open and UCD card (KX-TD190X) and buildt in modem 9600 bps. (KX-TD197X). Now I have the problem that the message waiting lamp will not turn on when a new message arrives. I have tried almost everything possible, even in additional function to change the lamp function from system to TVS, but with no succes. I have tried to check the way through the programming and found a parameter that could help, through mailbox 998, but that was activated. First I connected the VM to the slave unit of the 1232�s, I thought perhaps this was the problem to connect it to the slaveunit, then I changed it to the master, but again with no succes. So pls. anyone, any ideas ? I am using the HyperTerminal to program the TVP50, and I have even tried to connect with Panasonic�s own Windows Programmer for TVP50 ver. 2.00, and still, I can�t find a clue anywhere. I hope there is some wise folk�s out there who can help me in this matter. Best regards Frank Olesen. TC Tele & Data, Denmark. Mailto : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Web: www.theodor-christiansen.dk <http://www.theodor-christiansen.dk>
multipart/alternative text/plain (text body -- kept) text/html _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
