Hi,
We re-configured our TVS75 VPS but we can't make the message waiting lamp work when there's a message in the system. The VPS is connected to a Panasonic KSU VB-42050. Whenever we activate the Authorization of Message Notification in the COS, the two port always becomes busy with a message "outgoing call service" even though nobody's using them. Below are the parameters we've chosen in the PBX interface. PBX Type -------------------------------------- | TD1232 Integration Mode ------------------------------ | None Operator Transfer Sequence -------------------- | FTX......... Extension Transfer Sequence ------------------- | FTX......... Alternate Extension Transfer Sequence --------- | FTX......... Reconnect Sequence on Busy -------------------- | FWW......... Reconnect Sequence on No-Answer --------------- | FWW......... Reconnect Sequence on Refuse Call ------------- | FWW......... Light-On Sequence for Message Waiting Lamp ---- | T701X....... Light-Off Sequence for Message Waiting Lamp --- | T700X....... Call Waiting Sequence ------------------------- | 1........... Release for Call Waiting ---------------------- | F........... Are we using the correct PBX type? It was working before but the guy who set it up has left already and didn't leave the password for the administrator that's why we have to erase the whole settings and start from scratch. Hope somebody can help us out on this. Thanks, Mat multipart/alternative text/plain (text body -- kept) text/html _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
