Mat, You're PBX type is *not* KX-TD1232, it's an "other"
I've got some DBS 3rd party vm notes at: http://austintele.com/dbsvm.html They are for the larger system, but most of the stuff (DBSwise) that you'll need is there. To turn on a light on the DBS system, the voicemail must dial *4X. The off code is *5X. That's all you get out of me for free :) I 'spect there may be some other issues as well. If you want some tech support, get your VISA/MC ready and give me a call ($40/half hour). I'll fire up a VS75, connect it to my DBS and we'll work together to get you going. -Joe -- Joe Childs Austin Telecom (775) 888-9292 Voice (775) 888-9293 Fax On Mon, 20 Oct 2003 15:54:24 -0700, you wrote: >Hi, > > > >We re-configured our TVS75 VPS but we can't make the message waiting >lamp work when there's a message in the system. The VPS is connected to >a Panasonic KSU VB-42050. Whenever we activate the Authorization of >Message Notification in the COS, the two port always becomes busy with a >message "outgoing call service" even though nobody's using them. Below >are the parameters we've chosen in the PBX interface. > > > >PBX Type -------------------------------------- | TD1232 > >Integration Mode ------------------------------ | None > >Operator Transfer Sequence -------------------- | FTX......... > >Extension Transfer Sequence ------------------- | FTX......... > >Alternate Extension Transfer Sequence --------- | FTX......... > >Reconnect Sequence on Busy -------------------- | FWW......... > >Reconnect Sequence on No-Answer --------------- | FWW......... > >Reconnect Sequence on Refuse Call ------------- | FWW......... > >Light-On Sequence for Message Waiting Lamp ---- | T701X....... > >Light-Off Sequence for Message Waiting Lamp --- | T700X....... > >Call Waiting Sequence ------------------------- | 1........... > >Release for Call Waiting ---------------------- | F........... > > > >Are we using the correct PBX type? It was working before but the guy who >set it up has left already and didn't leave the password for the >administrator that's why we have to erase the whole settings and start >from scratch. > > > >Hope somebody can help us out on this. > > > >Thanks, > > > >Mat > > > > > > > > > >multipart/alternative > text/plain (text body -- kept) > text/html >_________________________________________________________________ >KX-T Mailing list --- http://kxthelp.com/ >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
