Hi List, I currently run a KXTD1232 with 32(D)+32(A) extension ports (almost maxed out) and 8 analogue trunks (maxed). I will be switching 7 of the 8 analogues to 4x ISDN BRI lines, which will give me 8 BRI channels.
My questions are: 1> will I be able to use DDI using the 4 BRI lines? I would like to have each and every extension directly accessible from the outside world (eg. Ext. 213 can be called directly using +3562244 213, ext. 320 using +3562244 320, etc.). I know it can be done with a PRI, but are there limitations using BRI? The telco says they have no problem doing this from their end. 2> will I still be able to use the 7 unused analogue ports? I'd like to use them to put in a Net2Phone (or similar) VoIP gateway. 3> will I be able to do LCR using both ISDN and analogue ports (eg. For international calls, try to use Net2Phone GW on analogue trunks, if it fails, use ISDN.) 4> Will I be able to manage all aspects of the ISDN ports using the KXTD Programmator software? Thanks for all your help. A _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
