Hi Jimmy, The TDA and the TAW848 both allow you to enter "host pbx" prefixes on a per-trunk-group basis. These prefixes are then ignored by the toll restriction.
You could thus have one (or more) TRS table, the table is assigned per extension, then group the co lines so those that need the 9 are in a group with 9 set to be ignored. Charles ----- Original Message ----- From: "Jim Gottlieb" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 29, 2004 3:20 AM Subject: KX-T: toll restriction good enough for my customer? > Hi. We have a customer that we installed a Mitel SX-10 for 20 years > ago, and it's starting to have problems, so we're looking at replacing > it with a Panasonic. > > My only concern is if the toll restriction is up to the capabilities of > the SX-10. > > Basically, they have two different kinds of lines, so we need to have > two completely different sets of toll restriction tables. One set of > lines are regular POTS and the other require Dial 9, so one table needs > to restrict NPAs and prefixes and the other needs to restrict with a 9 > in front of those same numbers. Maybe just absorb the 9? > > Do any or all the current KX-TA* systems let us do this? I'll be happy > to explain further if need be. > > Thanks... > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
