This comes from a friend who maintains the Panasonic NEC, and Toshiba phone systems for Cathay Bank. A little harsh but probably the truth! :)
>Date: Thu, 28 Aug 2008 12:31:35 -0700 (PDT) >From: Roger Hardesty <[EMAIL PROTECTED]> >Subject: Re: Fwd: KX-T: Flash Time [again] on KX-TA624 >To: D Resor <[EMAIL PROTECTED]> > >The problem here is that it is on VOIP and until VOIP gets out of >the toy/gimmick stage it will always be a problem. > > > > > >Date: Wed, 27 Aug 2008 22:13:40 -0400 > > >From: Bob <[EMAIL PROTECTED]> > > >To: kxt help <[email protected]> > > > > > >Follow up with continuing problems. > > >Tested all ports from the back of the VoIP modem from > > >Cablevision. Was NOT able to get FLASH to work using a single line phone. > > > > > >Cablevision came to check it out. They called me a few times and > > >tried to get it to work and > > could not ... plugged directly into the > > >back of the modem. > > > > > >They called me back about an hour later and said that line one works > > >with the phone system but lines 2, 3, 4,do not yet they claim that > > >these lines DO work with a single line phone plugged in directly. > > > > > >Is there any programming on a per line basis that might be affecting > > >the Flash feature for 3-way calling. I could not find any. > > > > > >The Flash mode is set at 1 and the time is 600 ms which is what they > > >confirmed was correct. > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
