Brent, what Brad just mentioned is not a bad idea - if all else fails.
The center pair is not used at all by the digital phone, so you can isolate the station wire at the ksu end (take it off the ksu) and put it directly on the fax line, bypassing the system all together. I remember when Panasonic came out with the xdp concept, Vodavi also tried to say that they had analog compatibility at every station for one of their systems. When I pressed the sales person on it, they explained that all you had to do was attach an analog line to the spare pair running out to each phone... ...back in the days of dial up. Charles Charles Patterson [email protected] Patterson Communications, Inc. Tarrytown, NY On Wed, Oct 6, 2010 at 4:07 AM, brad <[email protected]> wrote: > Whoops, kindof early, I see you turned on the XDP port. Troubleshoot it out > like any other line. Put a regular phone on the XDP port and see if you get > the ringing. There have been a few cabinets that the ringing for the XDP > ports has failed. Since no one is using the fax line for anything else, just > put the dial tone on the first pair going to the phone and that will > activate the XDP Jack with just dial tone. No real need to put it on the > system. brad > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > David Pelton > Sent: Wednesday, October 06, 2010 00:43 > To: Panasonic KX-T telephone system discussion list > Subject: Re: KX-T: Problem with ringing on XDP port of PDT using KXTD1232 > > 391 > > turn on the ringing > > On Tue, Oct 5, 2010 at 3:10 PM, Brent <[email protected]> wrote: > >> I have never used the XDP phone option on the KXTD1232 before and I am >> having a little trouble. >> >> >> >> I wanted to add a fax line to one location next to an existing extension >> digital Panasonic phone so I added a CO at the switch as CO-7. I turned > on >> the XDP extension for the existing phone near the FAX. I allowed that XPD >> to only use CO-7 and removed CO-7 from all other extensions. I set rings >> on >> all other extensions to "NONE" for CO-7 and set rings to "Immediate" for >> CO-7 on the XDP extension. Now I can call out from the XDP that the FAX > is >> to use, but when I call in to CO-7 the line7 blinks on the digital phone >> with the XDP port I am using, but there is no ringing so my FAX can't pick >> up. I have changed out all involved phone sets and no joy. What am I >> forgetting??? Thank you all for your time. >> >> _________________________________________________________________ >> KX-T Mailing list --- http://kxthelp.com/ >> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt >> > > > > -- > David Pelton > Perfect Phones > [email protected] > 512-447-8886 > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
