I assume you are talking about the software from Russia. I have V 1.24.27
and it works with KX-TD1232-4. and lower.
Here's the modem deal... If the remote card is the slower KX-TD196, I have
only been able to connect with an external Hayes Smartmodem 1200 setting the
baud rate at 1200 in the program.
If you have the higher speed internal card ...KX-TD197, then I use a US
Robotics Sportster 56K modem and set the baud in the program at 9600. It
works fine.
In either case, I have someone on Prem do a manual transfer to extension
299.
Good Luck.
The trickier item is connecting to a TVS 100. I finally solved it using my
US Robotics 56K external from my end and had to install a Zoom External
33.6K modem on site. This works well. Modem has to be turned on on- site
when needed or wired though a STICK switching device.
Has anyone found any other modem that works at the TVS end?
Bob Bruskin
Halstead Electronics Ltd.
Original Message -----
From: "bart miller" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, July 11, 2001 2:04 PM
Subject: KX-T: pnasonic windows version
> just asking if anybody has used the new or beta windows version for
programming?
>
> I like it-
>
> However, I can only connect with the internal modem in my IBM thinkpad
computer (xircom 56k v.34 9600 8 1 none using com port 1. The modem dials
ATDTxxx,,,,,t299 connects smoothly.
>
> The problem- when I use my external zoom or practical periphial v.34 com
port 2 in parallel with an anlaog telephones (used for operator transfer
to 299) I can not get the pbx internal modem and this external to link up.
for those of you who have tried this program , I have looked into the help
texts- I am following those instructions, but still---nothing--no
connection. I have tried different baud speeds 1200 4800 9600 etc.
>
> let me know if any of you have had experience with this!
>
> Sincerely,
> Bart
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
