And if Panasonic would publishe the protocol I'd write an apache module so
you could program it via the Web

But they won't, so i won't

:)

-duck

On Wed, 11 Jul 2001, Leo A. Novelli wrote:

> If the remote site has a permanent Internet connection (T1, DSL, Cable, 56K
> Frame, etc.), you may want to look into attaching the TVS to a terminal
> server.  I did this with our TVS50 and now I can telnet into the TVS and
> program it from anywhere in the world.  I picked up a Xyplex 1608A Terminal
> Server on eBay last month for only $36 and it has 8 ports on it.
> 
> I do something similar for access to our KX-TD816.  I attached the TD816 to
> an old PC (486) that has a permanent Internet connection and loaded
> pcAnywhere (you could also use VNC which is free) on it along with the
> Panasonic DOS programming software.  Now I can program the TD816 via the
> Internet using pcAnywhere.  You should also be able to attach the TVS to a
> second serial connection on such a PC and then be able to program both via
> pcAnywhere.  This would be a very fast, effective and inexpensive remote
> programming option.
> 
> Cheers,
> Leo
> 
> __________________________________________
> Leo A. Novelli
> Atlantis International
> "Serving All Your Internet Needs"
> [EMAIL PROTECTED]
> http://www.AtlantisNet.com/
> (714) 751-0264 x101
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Bob
> Bruskin
> Sent: Wednesday, July 11, 2001 7:40 PM
> To: bart miller
> Cc: kxt help
> Subject: KX-T: Re: pnasonic windows version
> 
> 
> I assume you are talking about the software from Russia. I have V 1.24.27
> and it works with KX-TD1232-4. and lower.
> Here's the modem deal... If the remote card is the slower KX-TD196, I have
> only been able to connect with an external Hayes Smartmodem 1200 setting the
> baud rate at 1200 in the program.
> If you have the higher speed internal card ...KX-TD197, then I use a US
> Robotics Sportster 56K modem and set the baud in the program at 9600.  It
> works fine.
> In either case, I have someone on Prem do a manual transfer to extension
> 299.
> Good Luck.
> 
> The trickier item is connecting to a TVS 100.  I finally solved it using my
> US Robotics 56K external from my end and had to install a Zoom External
> 33.6K modem on site. This works well.  Modem has to be turned on on- site
> when needed or wired though a STICK switching device.
> 
> Has anyone found any other modem that works at the TVS end?
> 
> Bob Bruskin
> Halstead Electronics Ltd.
> 
> Original Message -----
> From: "bart miller" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, July 11, 2001 2:04 PM
> Subject: KX-T: pnasonic windows version
> 
> 
> > just asking if anybody has used the new or beta windows version for
> programming?
> >
> > I like it-
> >
> > However, I can only connect with the internal modem in my IBM thinkpad
> computer (xircom 56k v.34  9600 8 1 none using com port 1. The modem dials
> ATDTxxx,,,,,t299 connects smoothly.
> >
> > The problem-  when I use my external zoom or practical periphial v.34 com
> port 2  in parallel with an anlaog telephones  (used for operator transfer
> to 299)  I can not get the pbx internal modem and this external to link up.
> for those of you who have tried this program , I have looked into the help
> texts- I am following those instructions, but still---nothing--no
> connection. I have tried different baud speeds 1200 4800 9600 etc.
> >
> > let me know if any of you have had experience with this!
> >
> > Sincerely,
> > Bart
> >
> >
> >
> >        *********************************************************
> >        *     To unsubscribe, e-mail [EMAIL PROTECTED]    *
> >        *      The KXT-Digest Home Page: http://kxthelp.com/    *
> >        *********************************************************
> 
> 
> 
>        *********************************************************
>        *     To unsubscribe, e-mail [EMAIL PROTECTED]    *
>        *      The KXT-Digest Home Page: http://kxthelp.com/    *
>        *********************************************************
> 
> 
> 
>        *********************************************************
>        *     To unsubscribe, e-mail [EMAIL PROTECTED]    *
>        *      The KXT-Digest Home Page: http://kxthelp.com/    *
>        *********************************************************
> 


-----------------------------------------------------------------------------
[EMAIL PROTECTED]            BackPack Software, Inc.        www.backpack.com
+1 651.645.7550 voice       "Life is an Adventure.    
+1 651.645.9798 fax            Don't forget your BackPack!"   
-----------------------------------------------------------------------------



       *********************************************************
       *     To unsubscribe, e-mail [EMAIL PROTECTED]    *
       *      The KXT-Digest Home Page: http://kxthelp.com/    *
       *********************************************************

Reply via email to