The display will not show Caller ID info until the outside call is ringing at the cordless port. The TVS50 is transferring the line, but until it hangs up the transfer is an intercom path. Thus no Caller ID info is sent until AFTER you answer the call. In the setup for the mailbox for the cordless extension, make it an alternate extension and set up the transfer sequence for alternate extensions for a blind transfer. I believe that would be FXD. This setting is under Hardware Settings. When the autoattendant transfers a call to the cordless it dials a flash, dials the extension of the cordless, then immediately hangs up to make the cordless ring with the outside call and thus shows the Caller ID info. Randy ----- Original Message ----- From: "Craig Heim" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 24, 2001 2:50 PM Subject: KX-T: Caller ID not displayed on cordless system phone > I've got a problem with my TD308, TVS50, and TD7895 cordless system > phone. I have Caller ID from the telephone company and a caller ID > display box from the company proves that it is working. The system is > setup for auto-attendent via the TVS50. The TD7895 is setup to be a > system phone (EMSS). > > I get the outside caller number on the TD7895 *AFTER* I answer the call, > but not during the ringing/alerting. During the ringing, the TD7895 > displays "295: V.Mail 1" which is the extension of the TVS50. Naturally, > I'd like to see the outside caller id name/number info during the ringing. > > Any recommendations? > > Thanks! > > -Craig > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
