Hi, guys.
Well, I've moved the card to the top position and moved the POTS line to CO
5/6, but no difference. I also tried keeping it in CO 1/2 while having the
card in the top position, but I'm still not seeing anything. I'm getting the
impression that the card is dead, dead, dead. I'm really bummed, as it was
one of the main reasons I bought this sucker.
Wish I knew someone else here in Maryland with a 1232 I could test this card
in. {sigh}
If any of you have more suggestions to try, I'd be grateful to hear them.
Thanks to all of you!
--David
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kerry
Smith
Sent: Tuesday, July 24, 2001 8:56 PM
To: David Kindred; [EMAIL PROTECTED]
Subject: Re: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
David,
I,ve found that to remove the caller id card it is necessary to remove the
co card from the cabinet. just tack the screws out and this will give you
access to the back of the co card. the tabs of the standoff that hold the
cid card on push through the co card and hold it in by expanding when they
come through. Carefully with needle nose pliers, you can compress the tabs
that have come through and push upward to release the cid card.
With caller id enabled on the line all you shoud need to enable it for the
phone is DIL 1:N ringing programed. Hope this helps.
Kerry Smith
-----Original Message-----
From: David Kindred <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, July 24, 2001 4:45 PM
Subject: RE: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
>Hi, fellas.
>
>Thanks for the suggestions.
>
>I just took the cabinet apart and note that the card is in the lower
>position. I was unable to get it out because of the two white plastic
>stand-offs holding it in on two corners. Before trying to just yank those
>out, I thought I'd ask if they are screwed in, or pushed in. I don't want
to
>damage the main board.
>
>I tried rocking the card a little to make sure I was getting good
>connections in the upper and lower sockets. No change. Still not seeing
>Caller ID info.
>
>Am I maybe on the wrong track? Am I supposed to configure the phones
(7230's
>and 7235) in some special way to display the Caller ID information, or is
it
>automatic that they should display it. I haven't been able to determine
that
>from the manuals.
>
>--David
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
>EDWARD FOUST JR
>Sent: Tuesday, July 24, 2001 4:42 PM
>To: David Kindred; [EMAIL PROTECTED]
>Subject: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
>
>
>
>----- Original Message -----
>From: "David Kindred" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Tuesday, July 24, 2001 12:36 PM
>Subject: KX-T: Newbie: Caller ID Doesn't Work on TD1232
>
>
>> Hi, folks.
>>
>> I've just installed a used TD1232-1 in my home. It came with the 193
>Caller
>> ID card and a DISA card. For the life of me, I cannot figure out how to
>get
>> the Caller ID to display on the 7230's and 7235.
>>
>> I've enabled the CID for all CO's (406) and even made entries for my cell
>> phone (110 and 111). When a call comes in, nothing is displayed on any of
>> the phones.
>>
>> If anyone can offer some insight to a rank beginner, I'd really
appreciate
>> it. The fellow I bought the system from said everything was functional
>> before he shipped it to me and I believe him.
>>
>> Much thanks!
>>
>> --David
>>
>> WHICH SLOT ARE YOU USING INSIDE CABINET. there are 2 slots one for
>lines 1-4 and the second one for slots 5-8. this could be your problem
>> also try moving it to the other slot 5-8. It may be bad. Had this
happen
>once before. dont forget to move the telephone lines also. (been there on
>this one)
>
>ed Foust, business telephone systems, inc.
>> *********************************************************
>> * To unsubscribe, e-mail [EMAIL PROTECTED] *
>> * The KXT-Digest Home Page: http://kxthelp.com/ *
>> *********************************************************
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
