INITIALIZE the cabinet and start all over!!!!!
----- Original Message -----
From: "David Kindred" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 24, 2001 5:36 PM
Subject: RE: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
> Hi, fellas.
>
> Thanks for the suggestions.
>
> I just took the cabinet apart and note that the card is in the lower
> position. I was unable to get it out because of the two white plastic
> stand-offs holding it in on two corners. Before trying to just yank those
> out, I thought I'd ask if they are screwed in, or pushed in. I don't want
to
> damage the main board.
>
> I tried rocking the card a little to make sure I was getting good
> connections in the upper and lower sockets. No change. Still not seeing
> Caller ID info.
>
> Am I maybe on the wrong track? Am I supposed to configure the phones
(7230's
> and 7235) in some special way to display the Caller ID information, or is
it
> automatic that they should display it. I haven't been able to determine
that
> from the manuals.
>
> --David
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> EDWARD FOUST JR
> Sent: Tuesday, July 24, 2001 4:42 PM
> To: David Kindred; [EMAIL PROTECTED]
> Subject: KX-T: Re: Newbie: Caller ID Doesn't Work on TD1232
>
>
>
> ----- Original Message -----
> From: "David Kindred" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, July 24, 2001 12:36 PM
> Subject: KX-T: Newbie: Caller ID Doesn't Work on TD1232
>
>
> > Hi, folks.
> >
> > I've just installed a used TD1232-1 in my home. It came with the 193
> Caller
> > ID card and a DISA card. For the life of me, I cannot figure out how to
> get
> > the Caller ID to display on the 7230's and 7235.
> >
> > I've enabled the CID for all CO's (406) and even made entries for my
cell
> > phone (110 and 111). When a call comes in, nothing is displayed on any
of
> > the phones.
> >
> > If anyone can offer some insight to a rank beginner, I'd really
appreciate
> > it. The fellow I bought the system from said everything was functional
> > before he shipped it to me and I believe him.
> >
> > Much thanks!
> >
> > --David
> >
> > WHICH SLOT ARE YOU USING INSIDE CABINET. there are 2 slots one
for
> lines 1-4 and the second one for slots 5-8. this could be your problem
> > also try moving it to the other slot 5-8. It may be bad. Had this
happen
> once before. dont forget to move the telephone lines also. (been there
on
> this one)
>
> ed Foust, business telephone systems, inc.
> > *********************************************************
> > * To unsubscribe, e-mail [EMAIL PROTECTED] *
> > * The KXT-Digest Home Page: http://kxthelp.com/ *
> > *********************************************************
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
