|
I believe you have a KX-TD1232,
correct?
If so, press intercom, then 391, the 1 turns the feature on.
Should you want to turn the feature off, then dial 390.
rd
-----Original Message-----
From:
Bob Bruskin <[EMAIL PROTECTED]>
To:
kxt help <[EMAIL PROTECTED]>
Date:
Sunday, September 16, 2001 1:59 PM
Subject: KX-T: SLT parallel
with PT on 1232D
I have two customers with KX-T1232D. One
is -3 and one is -4. Need to connect a SLT parallel with a PT and have
BOTH ring on incoming call.
The PT is a 7030 and the SLT is to be an
answering machine.
The manual says it can be done and is set in
program 100.
I see number 52 with default 39. I tried
it with the 39 and without the 39 but would not get a SLT to
ring.
I tried in Oleg's program to put a 39 in Flex
numbering for that jack. no go!. I also tried removing the 39 from the
line 52 code column. no go!
Is this something that has to be programmed
from a DPT directly?
All thoughts are greatly
appreciated.
Bob Bruskin
Halstead Electronics Ltd.
|
