The key set port is dead. Move 109 to a spair port.
On Thu, 20 Sep 2001 16:18:49 -0700 Dan Maxwell <[EMAIL PROTECTED]>
writes:
> I am unable to use extension 109 on my system. When I dial it, the
> display from any phone says Not Valid. I've assigned jack 09-1 to
> extension 109, and jack 09-2 to extension 209. Extension 209 works
> fine with a single line telephone. When I plug in a new KX-T7433
> phone, or even one of my other 7433 phones, it sounds like it wants
> to power up but is dead (no display, no functionality). It is
> properly wired from the second pair at the distribution block and is
> connected to the yellow/black pair of the station jack.
>
> Can you help? (Many thanks)
>
>
>
> *********************************************************
> * To unsubscribe, e-mail [EMAIL PROTECTED] *
> * The KXT-Digest Home Page: http://kxthelp.com/ *
> *********************************************************
>
All that is necessary for EVIL to triumph is for good people to do
NOTHING!
-Edmund Burke-
Chris Snyder KD4 OGD Cosby, Tn.
[EMAIL PROTECTED]
Stop the madness...vote LIBERTARIAN
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
