See the VersaBlock and Tailblock at www.phonegeeks.com/punbloc.html and our patch panel for the 1232 at www.phonegeeks.com/patpanwit25p.html
Michael N. Marcus AbleComm, Inc. www.ablecomm.com etc. ----- Original Message ----- From: "L. M. Rappaport" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 03, 2001 8:01 AM Subject: KX-T: Wiring a 1232 > I'm wiring a Panasonic 1232. It has, I believe 24 or 28 ports to > which we are going to attach around 33 extensions using the analog > line for some. The 1232 outputs to a patch panel and we were > originally thinking that we would wire the extensions to a separate > patch panel, but since this would mean hardwiring the combinations, I > was wondering what industry practice is. > > One solution would be to wire the jacks to a patch panel the 1232 to > another and then connect both to a 66 or 110 block. Could we set this > up so that the block has two patch panels of it's own and use patch > cords from the block to both the 1232 panel and the extension panel? > How would you setup such a block? Or would it be simpler to just go > with the original plan and hardwire the "extension" panel with the > combinations needed; i.e., wire the extensions to the appropriate > terminals on the patch panel instead of one for one? > > Thanks, > > Larry > -- > [EMAIL PROTECTED] > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
