Rick, Are you setting the delay answer from in the TVS? don't do it that way if you are. If you want night mode to answer immediately, set it to DIL 1:1 for each line to 165.
Also, in the trunk groups menu, you need to set the Intercept Routing for day and night to ext 165 (set it per trunk group). That way calls that are unanswered will get routed to the TVS. If you want a delayed answer during the day, set the Intercept Routing TIMER to the number of rings you want it to pick up at. I usually set systems to 4 rings. Keep the TVS delay answer to 0. If you want night mode to answer at a different time delay than the intercept routing is set at, then you may need to use the TVS delay settings, but most people don't need it. Charles ----- Original Message ----- From: "Richard McCoy" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, October 14, 2001 3:46 PM Subject: KX-T: TVS50 wont't answer > Thanks to one and all I decided to hook up my KXTD1232 at work along with my current TVS50 replacing my old analog 616 PBX. I think I got the integration between the 1232 and TVS50 ok, I was able to reach the TVS via ext 165 or 166. However the TVS would not answer any calls. I had it set up with a day and night mode. Night answer with a custom service almost on the first ring. Day mode was a different custom service answering after 30 seconds. Why is the TVS not answering any calls? > > Rick McCoy > > > > > ********************************************************* > * To unsubscribe, e-mail [EMAIL PROTECTED] * > * The KXT-Digest Home Page: http://kxthelp.com/ * > ********************************************************* > ********************************************************* * To unsubscribe, e-mail [EMAIL PROTECTED] * * The KXT-Digest Home Page: http://kxthelp.com/ * *********************************************************
