On the TTL issue I believe this is not addressing the issue. We can say
don’t decrement but when and how will the PE(s) do or don’t.

On 25/11/13 03:22, "Xuxiaohu" <[email protected]> wrote:

>Hi all,
>
>Major changes since the -01 version include:
>
>1) add a section about TTL consideration;
>2) remove the section of PE Router FIB Reduction;
>3) remove the section of PE Router RIB Reduction;
>
>Any further comments are welcome. BTW, the removed sections as mentioned
>above would be described in separate docs.
>
>Best regards,
>Xiaohu
>
>> -----邮件原件-----
>> 发件人: [email protected] [mailto:[email protected]]
>> 发送时间: 2013年11月25日 10:10
>> 收件人: Brendan Fee; Susan Hares; Fan Yongbing; Xuxiaohu; Xuxiaohu;
>>Christian
>> Jacquenet; Truman Boyes; Yongbing Fan
>> 主题: New Version Notification for draft-xu-l3vpn-virtual-subnet-02.txt
>> 
>> 
>> A new version of I-D, draft-xu-l3vpn-virtual-subnet-02.txt
>> has been successfully submitted by Xiaohu Xu and posted to the IETF
>>repository.
>> 
>> Filename:     draft-xu-l3vpn-virtual-subnet
>> Revision:     02
>> Title:                Virtual Subnet: A L3VPN-based Subnet Extension Solution
>> Creation date:        2013-11-25
>> Group:                Individual Submission
>> Number of pages: 13
>> URL:
>> http://www.ietf.org/internet-drafts/draft-xu-l3vpn-virtual-subnet-02.txt
>> Status:         
>>http://datatracker.ietf.org/doc/draft-xu-l3vpn-virtual-subnet
>> Htmlized:       
>>http://tools.ietf.org/html/draft-xu-l3vpn-virtual-subnet-02
>> Diff:
>> http://www.ietf.org/rfcdiff?url2=draft-xu-l3vpn-virtual-subnet-02
>> 
>> Abstract:
>>    This document describes a Layer3 Virtual Private Network (L3VPN)-
>>    based subnet extension solution referred to as Virtual Subnet, which
>>    can be used as a kind of Layer3 network virtualization overlay
>>    approach for data center interconnect.
>> 
>> 
>> 
>> 
>> Please note that it may take a couple of minutes from the time of
>>submission
>> until the htmlized version and diff are available at tools.ietf.org.
>> 
>> The IETF Secretariat
>

Reply via email to