> On Jun 20, 2007, at 22:58, Adele Shaak wrote:
> 
> > I am trying to figure out what type(s) of lace
> would be appropriate 
> > for an English lady's evening costume for the
> period 1796 - 1817. Does 
> > anybody have any thoughts?> the Napoleonic wars.
>> > Could I get away with making some Bucks Point or
> Tonder, or were those 
> > later on in period?

Here is what "Antique Laces" by Heather Toomer says.
Page 203-4.
In the 1790s and early 1800s ..the diminishing flow of
lace from the continent and the continuing interest in
lighter laces....the East Mildans industry was
stimulated to great production.

During the previous decades the lighter Lille ground,
known in England as Point ground, had been introduced
and this was now used to create [clothing items]. 
These, in the style of their time, were sprinkled with
spots or tiny motifs and edged with a light pattern of
repeated flowerheads or delicately drawn motifs. 
Usually these were arranged along a straight edge but
a pointed edge was common also.

The pointed edges of the 1800s to 1810s became
gradually more rounded as the simple flowerheads or
upright springs developed a curving form.   End.


The picture on the page for 1805 shows a 3 inch wide
edging with a straight edge.  Very dainty crown shapes
are scattered through the width of the lace, made with
many tallies.

The design along the edge is made with gimp and open
spots in areas surrounded by the gimp.  Small areas
are just open, larger areas have a double-sized ground
pattern or, in a long narrow area, a series of tallies
across the opening.

There are no half stitch or cloth stitch areas in this
pattern.  It's very dainty with the fine gimp lines
and tally spots -- very light and airy.

It should be possible to find a Bucks or Tonder
pattern that is very dainty and uses lots of gimp, or
gimp can be added.

Have fun with your project.  Post a picture of the
finished costume.
Alice in Oregon

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]

Reply via email to