This also works well with a bobbin winder, attaching the ends of the
bobbins to a bobbin.  When I don't have another pair of hands around I duck
tape the free ends to my granite counter top.

Kim​

On Fri, Aug 7, 2015 at 6:41 PM, Susan <[email protected]> wrote:

> Hello All!  At the 2014 IOLI convention in Sacramento, I attended Lauran
> Sundin's wire lace class.  One of the techniques she demonstrated in class
> involved twisting wires together to make heavier cable.  She used a
> cordless drill at low speed.  Today I wanted to combine two strands of 28 &
> two strands of 30 gauge wire to create a cable/gimp.  The last time I used
> a power drill, the torque caused a spiral fracture to my ring finger.  To
> avoid another trip to the emergency room, my husband suggested a Dremel
> drill because it has variable speed control.  Unfortunately none of the
> Dremel attachments allowed me to connect my wire to the drill.  That's when
> I remembered my Spinster!  This is a low-tech tool that many embroiderers
> use to make twisted cording for a finished edge.  Using a doubled length of
> each wire, I attached the wire loop ends to the Spinster hook.  My husband
> twisted together the four free ends & held them with a pair of flat blade
> jewelry pliers while I reeled!
>   under tension.  The resulting cable is quite lovely for my first effort
> & I will use this method again.  The Spinster was easy to use/control &
> adequate for my 28/30 gauge wire but does require an extra pair of hands.
> Hope this is helpful to others who are working with wire.  If someone else
> posted this info, sorry for the rerun.  Sincerely, Susan Hottle, Erie, PA
> USA
>
>
> Sent from my iPad
>
> -
> To unsubscribe send email to [email protected] containing the line:
> unsubscribe lace [email protected]. For help, write to
> [email protected]. Photo site:
> http://www.flickr.com/photos/lacemaker/sets/
>

-
To unsubscribe send email to [email protected] containing the line:
unsubscribe lace [email protected]. For help, write to
[email protected]. Photo site:
http://www.flickr.com/photos/lacemaker/sets/

Reply via email to