Hi! I have been setup next configuration :
$TC qdisc add dev $DEVB root handle 1: htb default 30 $TC class add dev $DEVB parent 1: classid 1:1 htb rate 100mbit ceil 100mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:10 htb rate 1mbit ceil 1mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:30 htb rate 2mbit ceil 100mbit burst 15k $TC qdisc add dev $DEVB parent 1:10 sfq perturb 10 $TC qdisc add dev $DEVB parent 1:30 sfq perturb 10 $iptables -A OUTPUT -t mangle -p tcp -d 192.168.15.129 -j MARK --set-mark 10 $tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10 and all works fine, only 1 mbit goes to 192.168.15.129, but if I do $iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129 -j MARK --set-mark 10 $tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw classid 1:10 HTTP to 192.168.15.129 goes full 100 Mbit . Kernel 2.4.19 ; htb patch, tc binnary from HTB homepage Where my mistake ? Thanks. -- Sheshka Aleksey Senior Security Administrator PGP key : http://pgp.dtype.org:11371/pks/lookup?op=get&search=0x0BE90515 _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
