On Friday 01 November 2002 10:50, Alexey Sheshka wrote:
> Hi!
>
> I have been setup next configuration :
>
> $TC qdisc add dev $DEVB root handle 1: htb default 30
>
> $TC class add dev $DEVB parent 1: classid 1:1 htb rate 100mbit ceil 100mbit
> burst 15k $TC class add dev $DEVB parent 1:1 classid 1:10 htb rate 1mbit
> ceil 1mbit burst 15k $TC class add dev $DEVB parent 1:1 classid 1:30 htb
> rate 2mbit ceil 100mbit burst 15k
>
> $TC qdisc add dev $DEVB parent 1:10 sfq perturb 10
> $TC qdisc add dev $DEVB parent 1:30 sfq perturb 10
>
> $iptables -A OUTPUT -t mangle -p tcp -d 192.168.15.129 -j MARK --set-mark
> 10
> $tc filter add dev $DEVB protocol ip parent 1:0 prio 1 handle 10 fw
> classid 1:10
>
> and all works fine, only 1 mbit goes to 192.168.15.129, but if I do
>
> $iptables -A OUTPUT -t mangle -p tcp -s 0/0 --sport 80 -d 192.168.15.129
> -j MARK --set-mark 10
> $tc filter add dev $DEVB protocol ip parent 1:0 prio
> 1 handle 10 fw classid 1:10
>
> HTTP to 192.168.15.129 goes full 100 Mbit .
Can you check the iptables counters so you are sure that the packets get
marked? Maybe a tcpdump can give you more information.
Stef
--
[EMAIL PROTECTED]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
