Hello, I'm using a script with tc, to limit my outgoing traffic : tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbit burst 6k tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst 172.28.54.9 flowid 1:1
I want to test bandwidth with iperf to see if limitation is correct. Sometimes, I get correct measure for certain rates, but i often get measure that do not correspond to rate. For example, if rate is 500kbit, measure is 2000kbit/s... Can someone help me ? Thanks, Olivier
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
