Hi all,
I'm having a hell of a time getting my IFB to work. I know I've done
this before, so I'm missing something stupid. Can anybody tell me what
it might be?
Configs as follows:
--------
#!/bin/sh
modprobe ifb numifbs=1000
modprobe act_mirred
modprobe 8021q
brctl addbr br0
brctl setfd br0 0
brctl stp br0 off
brctl addif br0 eth1
brctl addif br0 eth2
ifconfig eth1 up
ifconfig eth2 up
ifconfig br0 up
tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
tc qdisc add dev eth2 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
ifconfig ifb0 up
tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
tc class add dev ifb0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate
100Kbit weight 10Kbit prio 5 allot 1514 cell 8 maxburst 20 avpkt 1000
bounded isolated
tc qdisc add dev eth1 ingress
tc qdisc add dev eth2 ingress
tc filter add dev eth1 parent ffff: protocol ip prio 10 u32 match u32 0
0 action mirred egress redirect dev ifb0
tc filter add dev eth2 parent ffff: protocol ip prio 10 u32 match u32 0
0 action mirred egress redirect dev ifb0
tc filter add dev ifb0 parent 1:0 protocol ip prio 1 u32 match u32 0 0
flowid 1:1
--------------
By my reckoning, this should redirect all packets passing through eth2
and eth1 through the IFB, and put a rate limit on the IFB of
100Kbits/sec.
What have I missed?
Regards,
Leigh
Leigh Sharpe
Network Systems Engineer
Pacific Wireless
Ph +61 3 9584 8966
Mob 0408 009 502
Helpdesk 1300 300 616
email [EMAIL PROTECTED]
web www.pacificwireless.com.au
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
