I am using fpc 2.2 installed from gentoo with the sources installed
and lazarus from svn (rev 12621). I have set the lazarus directory
and can compile and run a simple single form project.. however, when I
try to install a pkg file (in this case tagraph), I get an error of
Compiling lazarus.pp
lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus
any ideas?
Here is the output:
[EMAIL PROTECTED]:~/Programs/lazarus$ ./startlazarus
Gtk-WARNING **: Failed to load module "libgnomebreakpad.so":
libgnomebreakpad.so: cannot open shared object file: No such file or
directory
Gtk-WARNING **: Failed to load module "libgnomebreakpad.so":
libgnomebreakpad.so: cannot open shared object file: No such file or
directory
TApplication.IconChanged - TODO: convert this message...no
implementation in gtk or win32
NOTE: codetools config file not found - using defaults
NOTE: help options config file not found - using defaults
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121
TMainIDE.DoLoadLFM A /home/matt/unit1.pas IsPartOfProject=True
SUCCESS: streaming lfm="/home/matt/unit1.lfm"
TPkgManager.DoCompilePackage A TAChartLazarusPkg 0.0 Flags=[]
TMainIDE.DoSaveAll
TMainIDE.DoSaveProject End
[TExternalToolList.Run] CmdLine="/usr/bin/ppc386 -S2cgi -OG1 -gl
-vewnhi -l -Fu../../lcl/units/i386-linux/
-Fu../../lcl/units/i386-linux/gtk/ -Fu../../packager/units/i386-linux/
-Fu. -FUlib/i386-linux/ -dLCL -dLCLgtk tachartlazaruspkg.pas"
WorkDir="/home/matt/Programs/lazarus/components/tachart/"
Hint: Start of reading config file /etc/fpc.cfg
Hint: End of reading config file /etc/fpc.cfg
Warning: You are using the obsolete switch -OG
Free Pascal Compiler version 2.2.0 [2007/09/20] for i386
Copyright (c) 1993-2007 by Florian Klaempfl
Target OS: Linux for i386
Compiling tachartlazaruspkg.pas
Compiling taseries.pas
Compiling tagraph.pas
Compiling taengine.pas
Compiling taseries.pas
taseries.pas(377,23) Warning: Function result does not seem to be set
taseries.pas(121,35) Hint: Parameter "SeriesColor" not used
taseries.pas(250,28) Hint: Parameter "Sender" not used
taseries.pas(635,51) Hint: Local variable "yi1" does not seem to be initialized
taseries.pas(635,51) Hint: Local variable "xi1" does not seem to be initialized
taseries.pas(639,51) Hint: Local variable "yi2" does not seem to be initialized
taseries.pas(639,51) Hint: Local variable "xi2" does not seem to be initialized
taseries.pas(582,6) Note: Local variable "j" not used
taseries.pas(586,4) Note: Local variable "Min" is assigned but never used
taseries.pas(586,8) Note: Local variable "Max" is assigned but never used
taseries.pas(586,12) Note: Local variable "a" not used
taseries.pas(586,14) Note: Local variable "b" not used
taseries.pas(587,4) Note: Local variable "Inside1" not used
taseries.pas(587,12) Note: Local variable "Inside2" not used
taseries.pas(588,4) Note: Local variable "Chart1" not used
taseries.pas(589,4) Note: Local variable "YLeft" not used
taseries.pas(589,10) Note: Local variable "YRight" not used
taseries.pas(589,17) Note: Local variable "XBottom" not used
taseries.pas(589,25) Note: Local variable "XTop" not used
taseries.pas(590,4) Note: Local variable "XLine" not used
taseries.pas(590,10) Note: Local variable "YLine" not used
taseries.pas(591,4) Note: Local variable "BLeft" not used
taseries.pas(591,10) Note: Local variable "BRight" not used
taseries.pas(591,17) Note: Local variable "BBottom" not used
taseries.pas(591,25) Note: Local variable "BTop" not used
taseries.pas(592,4) Note: Local variable "XLeftI" not used
taseries.pas(592,11) Note: Local variable "YLeftI" not used
taseries.pas(592,18) Note: Local variable "XRightI" not used
taseries.pas(592,26) Note: Local variable "YRightI" not used
taseries.pas(592,34) Note: Local variable "XBottomI" not used
taseries.pas(592,43) Note: Local variable "YBottomI" not used
taseries.pas(592,52) Note: Local variable "XTopI" not used
taseries.pas(592,58) Note: Local variable "YTopI" not used
taseries.pas(786,17) Warning: Function result does not seem to be set
taseries.pas(894,82) Hint: Function result variable does not seem to
be initialized
taseries.pas(899,82) Hint: Function result variable does not seem to
be initialized
taseries.pas(304,28) Hint: Parameter "Sender" not used
taseries.pas(1106,4) Warning: Label not defined "Points"
taseries.pas(1064,10) Hint: Local label "Points" is not used
taseries.pas(1142,5) Note: Local variable "i" not used
taseries.pas(152,28) Hint: Parameter "Sender" not used
taseries.pas(1258,81) Hint: Local variable "topY" does not seem to be
initialized
taseries.pas(1258,81) Hint: Local variable "topX" does not seem to be
initialized
taseries.pas(1259,65) Hint: Local variable "bottomY" does not seem to
be initialized
taseries.pas(177,28) Hint: Parameter "Sender" not used
taseries.pas(1399,36) Hint: use DIV instead to get an integer result
taseries.pas(1412,7) Hint: Local variable "AY" does not seem to be initialized
taseries.pas(1412,7) Hint: Local variable "AX" does not seem to be initialized
taseries.pas(1415,7) Hint: Local variable "BY" does not seem to be initialized
taseries.pas(1415,7) Hint: Local variable "BX" does not seem to be initialized
taseries.pas(1482,22) Warning: Function result does not seem to be set
taseries.pas(209,28) Hint: Parameter "Sender" not used
taseries.pas(1574,51) Hint: Local variable "yi1" does not seem to be initialized
taseries.pas(1574,51) Hint: Local variable "xi1" does not seem to be initialized
taseries.pas(1578,51) Hint: Local variable "yi2" does not seem to be initialized
taseries.pas(1578,51) Hint: Local variable "xi2" does not seem to be initialized
taseries.pas(1580,63) Hint: Local variable "iy_min" does not seem to
be initialized
taseries.pas(1523,9) Hint: Local const "Larg" is not used
taseries.pas(1525,6) Note: Local variable "j" not used
taseries.pas(1529,4) Note: Local variable "Inside1" not used
taseries.pas(1529,12) Note: Local variable "Inside2" not used
taseries.pas(1530,4) Note: Local variable "Chart1" not used
taseries.pas(1531,4) Note: Local variable "YLeft" not used
taseries.pas(1531,10) Note: Local variable "YRight" not used
taseries.pas(1531,17) Note: Local variable "XBottom" not used
taseries.pas(1531,25) Note: Local variable "XTop" not used
taseries.pas(1532,4) Note: Local variable "XLine" not used
taseries.pas(1532,10) Note: Local variable "YLine" not used
taseries.pas(1533,4) Note: Local variable "BLeft" not used
taseries.pas(1533,10) Note: Local variable "BRight" not used
taseries.pas(1533,17) Note: Local variable "BBottom" not used
taseries.pas(1533,25) Note: Local variable "BTop" not used
taseries.pas(1534,4) Note: Local variable "XLeftI" not used
taseries.pas(1534,11) Note: Local variable "YLeftI" not used
taseries.pas(1534,18) Note: Local variable "XRightI" not used
taseries.pas(1534,26) Note: Local variable "YRightI" not used
taseries.pas(1534,34) Note: Local variable "XBottomI" not used
taseries.pas(1534,43) Note: Local variable "YBottomI" not used
taseries.pas(1534,52) Note: Local variable "XTopI" not used
taseries.pas(1534,58) Note: Local variable "YTopI" not used
tagraph.pas(176,28) Hint: Parameter "Sender" not used
tagraph.pas(151,28) Hint: Parameter "Sender" not used
tagraph.pas(96,28) Hint: Parameter "Sender" not used
tagraph.pas(125,28) Hint: Parameter "Sender" not used
tagraph.pas(950,4) Note: Local variable "MySerie" not used
tagraph.pas(335,28) Hint: Parameter "Sender" not used
tagraph.pas(1107,55) Hint: Local variable "YTemp" does not seem to be
initialized
tagraph.pas(1231,52) Hint: Local variable "XTemp" does not seem to be
initialized
tagraph.pas(1834,4) Note: Local variable "Rgn" not used
tagraph.pas(1835,4) Note: Local variable "p" not used
tagraph.pas(1872,4) Note: Local variable "j" not used
tagraph.pas(1872,6) Note: Local variable "k" not used
tagraph.pas(1873,14) Note: Local variable "Xg" not used
tagraph.pas(1873,17) Note: Local variable "Yg" not used
tagraph.pas(1910,4) Note: Local variable "j" not used
tagraph.pas(1910,6) Note: Local variable "k" not used
tagraph.pas(1910,15) Note: Local variable "YPoint" not used
tagraph.pas(255,33) Hint: Parameter "Y" not used
tagraph.pas(1966,25) Warning: Local variable "XPoint" does not seem to
be initialized
tagraph.pas(1945,4) Note: Local variable "j" not used
tagraph.pas(1945,6) Note: Local variable "k" not used
tagraph.pas(1946,14) Note: Local variable "Xg" not used
tagraph.pas(1946,17) Note: Local variable "Yg" not used
tagraph.pas(256,31) Hint: Parameter "X" not used
tagraph.pas(281,25) Hint: Parameter "Button" not used
tagraph.pas(281,47) Hint: Parameter "Shift" not used
tagraph.pas(2056,74) Hint: Local variable "PointNumber" does not seem
to be initialized
tagraph.pas(2056,74) Hint: Local variable "SerieNumber" does not seem
to be initialized
tagraph.pas(2015,4) Note: Local variable "MySerie" is assigned but never used
tagraph.pas(282,25) Hint: Parameter "Shift" not used
tagraph.pas(283,23) Hint: Parameter "Button" not used
tagraph.pas(283,45) Hint: Parameter "Shift" not used
tagraph.pas(2224,5) Note: Local variable "i" not used
tagraph.pas(142,5) Note: Private field "TChartAxisTitle.FVisible" is never used
tachartlazaruspkg.pas(10,11) Hint: Unit "TASeries" not used in TAChartLazarusPkg
tachartlazaruspkg.pas(10,21) Hint: Unit "TAEngine" not used in TAChartLazarusPkg
4121 lines compiled, 0.8 sec
6 warning(s) issued
47 hint(s) issued
66 note(s) issued
"Compiling package TAChartLazarusPkg 0.0" completed
TPkgManager.SaveAutoInstallDependencies A TAChartLazarusPkg
TPkgManager.SaveAutoInstallDependencies A rx
CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386
TMainIDE.DoSaveAll
TMainIDE.DoSaveProject End
CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386
[TExternalToolList.Run] CmdLine="/usr/bin/make ide -w"
WorkDir="/home/matt/Programs/lazarus/"
make: Entering directory `/home/matt/Programs/lazarus'
Makefile:3403: warning: overriding commands for target `examples'
Makefile:3363: warning: ignoring old commands for target `examples'
/usr/bin/make -C ide ide
make[1]: Entering directory `/home/matt/Programs/lazarus/ide'
/usr/bin/make --assume-new=lazarus.pp lazarus
make[2]: Entering directory `/home/matt/Programs/lazarus/ide'
/usr/bin/ppc386 -gl -Fu../lcl/units/i386-linux
-Fu../lcl/units/i386-linux/gtk2
-Fu../components/codetools/units/i386-linux
-Fu../components/synedit/units/i386-linux -Fu../components/custom
-Fu../components/mpaslex -Fu../ideintf/units/i386-linux -Fu../designer
-Fu../designer/jitform/units/i386-linux -Fu../debugger -Fu../converter
-Fu../packager -Fu../packager/units/i386-linux -Fu../units/i386-linux
-Fu. -Fu/usr/lib/fpc/2.2.0/units/i386-linux/rtl
-Fu/usr/lib/fpc/2.2.0/units/i386-linux/regexpr -Fiinclude
-Fiinclude/linux -Fi../images -FE.. -FU../units/i386-linux
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 -Fl/usr/local/lib
-Fl//usr//lib/opengl/nvidia/lib -Fl/usr/i686-pc-linux-gnu/lib
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.2.1
-Fl/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6 -Fl/usr/lib/nspr
-Fl/usr/lib/nss -Fl/usr/lib/qt4 -Fl/usr/kde/3.5/lib -Fl/usr/qt/3/lib
-Fl/usr/games/lib -Fl/usr/lib/bibblelabs/bibblepro/libs
-Fl/usr/lib/fltk-1.1 -Cn -di386 lazarus.pp
Free Pascal Compiler version 2.2.0 [2007/09/20] for i386
Copyright (c) 1993-2007 by Florian Klaempfl
Target OS: Linux for i386
Compiling lazarus.pp
lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus
GetMsgLineFilename Filename "lazarus.pp" not found.
TExternalToolList.Run Exception:
/home/matt/Programs/lazarus/ide/lazarus.pp(74,11) Fatal: Can't find
unit Interfaces used by Lazarus
TMainIDE.DoLoadLFM there is no LFM file for
"/home/matt/Programs/lazarus/ide/lazarus.pp"
TMainIDE.DoBuildLazarus: Build Lazarus without linking failed.
[EMAIL PROTECTED]:~/Programs/lazarus$ ./startlazarus
Gtk-WARNING **: Failed to load module "libgnomebreakpad.so":
libgnomebreakpad.so: cannot open shared object file: No such file or
directory
Gtk-WARNING **: Failed to load module "libgnomebreakpad.so":
libgnomebreakpad.so: cannot open shared object file: No such file or
directory
TApplication.IconChanged - TODO: convert this message...no
implementation in gtk or win32
NOTE: codetools config file not found - using defaults
NOTE: help options config file not found - using defaults
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208
TManagedBreakPoints.NotifyAdd A
/home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121
TMainIDE.DoLoadLFM A /home/matt/unit1.pas IsPartOfProject=True
SUCCESS: streaming lfm="/home/matt/unit1.lfm"
TPkgManager.DoCompilePackage A TAChartLazarusPkg 0.0 Flags=[]
TMainIDE.DoSaveAll
TMainIDE.DoSaveProject End
[TExternalToolList.Run] CmdLine="/usr/bin/ppc386 -S2cgi -OG1 -gl
-vewnhi -l -Fu../../lcl/units/i386-linux/
-Fu../../lcl/units/i386-linux/gtk/ -Fu../../packager/units/i386-linux/
-Fu. -FUlib/i386-linux/ -dLCL -dLCLgtk tachartlazaruspkg.pas"
WorkDir="/home/matt/Programs/lazarus/components/tachart/"
Hint: Start of reading config file /etc/fpc.cfg
Hint: End of reading config file /etc/fpc.cfg
Warning: You are using the obsolete switch -OG
Free Pascal Compiler version 2.2.0 [2007/09/20] for i386
Copyright (c) 1993-2007 by Florian Klaempfl
Target OS: Linux for i386
Compiling tachartlazaruspkg.pas
tachartlazaruspkg.pas(10,11) Hint: Unit "TASeries" not used in TAChartLazarusPkg
tachartlazaruspkg.pas(10,21) Hint: Unit "TAEngine" not used in TAChartLazarusPkg
21 lines compiled, 1.2 sec
1 warning(s) issued
4 hint(s) issued
"Compiling package TAChartLazarusPkg 0.0" completed
TGtkWSCustomMemo.CreateHandle
TGtkWSCustomMemo.CreateHandle
CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386
TMainIDE.DoSaveAll
TMainIDE.DoSaveProject End
CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386
[TExternalToolList.Run] CmdLine="/usr/bin/make ide -w"
WorkDir="/home/matt/Programs/lazarus/"
make: Entering directory `/home/matt/Programs/lazarus'
Makefile:3403: warning: overriding commands for target `examples'
Makefile:3363: warning: ignoring old commands for target `examples'
/usr/bin/make -C ide ide
make[1]: Entering directory `/home/matt/Programs/lazarus/ide'
/usr/bin/make --assume-new=lazarus.pp lazarus
make[2]: Entering directory `/home/matt/Programs/lazarus/ide'
/usr/bin/ppc386 -gl -Fu../lcl/units/i386-linux
-Fu../lcl/units/i386-linux/gtk2
-Fu../components/codetools/units/i386-linux
-Fu../components/synedit/units/i386-linux -Fu../components/custom
-Fu../components/mpaslex -Fu../ideintf/units/i386-linux -Fu../designer
-Fu../designer/jitform/units/i386-linux -Fu../debugger -Fu../converter
-Fu../packager -Fu../packager/units/i386-linux -Fu../units/i386-linux
-Fu. -Fu/usr/lib/fpc/2.2.0/units/i386-linux/rtl
-Fu/usr/lib/fpc/2.2.0/units/i386-linux/regexpr -Fiinclude
-Fiinclude/linux -Fi../images -FE.. -FU../units/i386-linux
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 -Fl/usr/local/lib
-Fl//usr//lib/opengl/nvidia/lib -Fl/usr/i686-pc-linux-gnu/lib
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2
-Fl/usr/lib/gcc/i686-pc-linux-gnu/4.2.1
-Fl/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6 -Fl/usr/lib/nspr
-Fl/usr/lib/nss -Fl/usr/lib/qt4 -Fl/usr/kde/3.5/lib -Fl/usr/qt/3/lib
-Fl/usr/games/lib -Fl/usr/lib/bibblelabs/bibblepro/libs
-Fl/usr/lib/fltk-1.1 -Cn -di386 lazarus.pp
Free Pascal Compiler version 2.2.0 [2007/09/20] for i386
Copyright (c) 1993-2007 by Florian Klaempfl
Target OS: Linux for i386
Compiling lazarus.pp
lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus
GetMsgLineFilename Filename "lazarus.pp" not found.
TExternalToolList.Run Exception:
/home/matt/Programs/lazarus/ide/lazarus.pp(74,11) Fatal: Can't find
unit Interfaces used by Lazarus
TMainIDE.DoLoadLFM there is no LFM file for
"/home/matt/Programs/lazarus/ide/lazarus.pp"
TMainIDE.DoBuildLazarus: Build Lazarus without linking failed.
TMainIDE.DoCloseEditorFile A PageIndex=1
TMainIDE.DoCloseEditorFile end
TMainIDE.DoCloseEditorFile A PageIndex=0
TCustomFormEditor.DeleteComponent Form1:TForm1 IsJITComponent=True
FreeComponent=True
TCustomFormEditor.DeleteComponent Button1:TButton IsJITComponent=False
FreeComponent=True
TMainIDE.DoCloseEditorFile end
LAZARUS END - cleaning up ...
[TMainIDE.Destroy] A
TManagedBreakPoints.NotifyRemove A
/home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121 0
TManagedBreakPoints.NotifyRemove A
/home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208 0
TManagedBreakPoints.NotifyRemove A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978 0
TManagedBreakPoints.NotifyRemove A
/home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908 0
[TMainIDE.Destroy] B -> inherited Destroy... TMainIDE
[TMainIDE.Destroy] END
_________________________________________________________________
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject
archives at http://www.lazarus.freepascal.org/mailarchives
