On Sun, 28 Oct 2007 18:05:03 -0500 "Matt Henley" <[EMAIL PROTECTED]> wrote:
> I am using fpc 2.2 installed from gentoo with the sources installed > and lazarus from svn (rev 12621). I have set the lazarus directory > and can compile and run a simple single form project.. however, when I > try to install a pkg file (in this case tagraph), I get an error of > > Compiling lazarus.pp > lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus > > any ideas? Normally this means some ppu files are outdated and you just need to recompile them or you misconfigured something and now some ppu files exist twice and the compiler finds the old ones. First you can try $ export LCL_PLATFORM=gtk2; make clean all idepkg This will rebuild the whole gtk2 IDE with packages. If this gives the same error, then you have some old ppu files. You can see all files found by the compiler with: $ export LCL_PLATFORM=gtk2; make idepkg OPT=-vut Beware: This will show you *a lot* of information. Mattias > > > Here is the output: > > [EMAIL PROTECTED]:~/Programs/lazarus$ ./startlazarus > > Gtk-WARNING **: Failed to load module "libgnomebreakpad.so": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > > Gtk-WARNING **: Failed to load module "libgnomebreakpad.so": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > TApplication.IconChanged - TODO: convert this message...no > implementation in gtk or win32 > NOTE: codetools config file not found - using defaults > NOTE: help options config file not found - using defaults > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121 > TMainIDE.DoLoadLFM A /home/matt/unit1.pas IsPartOfProject=True > SUCCESS: streaming lfm="/home/matt/unit1.lfm" > TPkgManager.DoCompilePackage A TAChartLazarusPkg 0.0 Flags=[] > TMainIDE.DoSaveAll > TMainIDE.DoSaveProject End > [TExternalToolList.Run] CmdLine="/usr/bin/ppc386 -S2cgi -OG1 -gl > -vewnhi -l -Fu../../lcl/units/i386-linux/ > -Fu../../lcl/units/i386-linux/gtk/ -Fu../../packager/units/i386-linux/ > -Fu. -FUlib/i386-linux/ -dLCL -dLCLgtk tachartlazaruspkg.pas" > WorkDir="/home/matt/Programs/lazarus/components/tachart/" > Hint: Start of reading config file /etc/fpc.cfg > Hint: End of reading config file /etc/fpc.cfg > Warning: You are using the obsolete switch -OG > Free Pascal Compiler version 2.2.0 [2007/09/20] for i386 > Copyright (c) 1993-2007 by Florian Klaempfl > Target OS: Linux for i386 > Compiling tachartlazaruspkg.pas > Compiling taseries.pas > Compiling tagraph.pas > Compiling taengine.pas > Compiling taseries.pas > taseries.pas(377,23) Warning: Function result does not seem to be set > taseries.pas(121,35) Hint: Parameter "SeriesColor" not used > taseries.pas(250,28) Hint: Parameter "Sender" not used > taseries.pas(635,51) Hint: Local variable "yi1" does not seem to be > initialized taseries.pas(635,51) Hint: Local variable "xi1" does not > seem to be initialized taseries.pas(639,51) Hint: Local variable > "yi2" does not seem to be initialized taseries.pas(639,51) Hint: > Local variable "xi2" does not seem to be initialized > taseries.pas(582,6) Note: Local variable "j" not used > taseries.pas(586,4) Note: Local variable "Min" is assigned but never > used taseries.pas(586,8) Note: Local variable "Max" is assigned but > never used taseries.pas(586,12) Note: Local variable "a" not used > taseries.pas(586,14) Note: Local variable "b" not used > taseries.pas(587,4) Note: Local variable "Inside1" not used > taseries.pas(587,12) Note: Local variable "Inside2" not used > taseries.pas(588,4) Note: Local variable "Chart1" not used > taseries.pas(589,4) Note: Local variable "YLeft" not used > taseries.pas(589,10) Note: Local variable "YRight" not used > taseries.pas(589,17) Note: Local variable "XBottom" not used > taseries.pas(589,25) Note: Local variable "XTop" not used > taseries.pas(590,4) Note: Local variable "XLine" not used > taseries.pas(590,10) Note: Local variable "YLine" not used > taseries.pas(591,4) Note: Local variable "BLeft" not used > taseries.pas(591,10) Note: Local variable "BRight" not used > taseries.pas(591,17) Note: Local variable "BBottom" not used > taseries.pas(591,25) Note: Local variable "BTop" not used > taseries.pas(592,4) Note: Local variable "XLeftI" not used > taseries.pas(592,11) Note: Local variable "YLeftI" not used > taseries.pas(592,18) Note: Local variable "XRightI" not used > taseries.pas(592,26) Note: Local variable "YRightI" not used > taseries.pas(592,34) Note: Local variable "XBottomI" not used > taseries.pas(592,43) Note: Local variable "YBottomI" not used > taseries.pas(592,52) Note: Local variable "XTopI" not used > taseries.pas(592,58) Note: Local variable "YTopI" not used > taseries.pas(786,17) Warning: Function result does not seem to be set > taseries.pas(894,82) Hint: Function result variable does not seem to > be initialized taseries.pas(899,82) Hint: Function result variable > does not seem to be initialized > taseries.pas(304,28) Hint: Parameter "Sender" not used > taseries.pas(1106,4) Warning: Label not defined "Points" > taseries.pas(1064,10) Hint: Local label "Points" is not used > taseries.pas(1142,5) Note: Local variable "i" not used > taseries.pas(152,28) Hint: Parameter "Sender" not used > taseries.pas(1258,81) Hint: Local variable "topY" does not seem to be > initialized > taseries.pas(1258,81) Hint: Local variable "topX" does not seem to be > initialized > taseries.pas(1259,65) Hint: Local variable "bottomY" does not seem to > be initialized > taseries.pas(177,28) Hint: Parameter "Sender" not used > taseries.pas(1399,36) Hint: use DIV instead to get an integer result > taseries.pas(1412,7) Hint: Local variable "AY" does not seem to be > initialized taseries.pas(1412,7) Hint: Local variable "AX" does not > seem to be initialized taseries.pas(1415,7) Hint: Local variable "BY" > does not seem to be initialized taseries.pas(1415,7) Hint: Local > variable "BX" does not seem to be initialized taseries.pas(1482,22) > Warning: Function result does not seem to be set taseries.pas(209,28) > Hint: Parameter "Sender" not used taseries.pas(1574,51) Hint: Local > variable "yi1" does not seem to be initialized taseries.pas(1574,51) > Hint: Local variable "xi1" does not seem to be initialized > taseries.pas(1578,51) Hint: Local variable "yi2" does not seem to be > initialized taseries.pas(1578,51) Hint: Local variable "xi2" does not > seem to be initialized taseries.pas(1580,63) Hint: Local variable > "iy_min" does not seem to be initialized taseries.pas(1523,9) Hint: > Local const "Larg" is not used taseries.pas(1525,6) Note: Local > variable "j" not used taseries.pas(1529,4) Note: Local variable > "Inside1" not used taseries.pas(1529,12) Note: Local variable > "Inside2" not used taseries.pas(1530,4) Note: Local variable "Chart1" > not used taseries.pas(1531,4) Note: Local variable "YLeft" not used > taseries.pas(1531,10) Note: Local variable "YRight" not used > taseries.pas(1531,17) Note: Local variable "XBottom" not used > taseries.pas(1531,25) Note: Local variable "XTop" not used > taseries.pas(1532,4) Note: Local variable "XLine" not used > taseries.pas(1532,10) Note: Local variable "YLine" not used > taseries.pas(1533,4) Note: Local variable "BLeft" not used > taseries.pas(1533,10) Note: Local variable "BRight" not used > taseries.pas(1533,17) Note: Local variable "BBottom" not used > taseries.pas(1533,25) Note: Local variable "BTop" not used > taseries.pas(1534,4) Note: Local variable "XLeftI" not used > taseries.pas(1534,11) Note: Local variable "YLeftI" not used > taseries.pas(1534,18) Note: Local variable "XRightI" not used > taseries.pas(1534,26) Note: Local variable "YRightI" not used > taseries.pas(1534,34) Note: Local variable "XBottomI" not used > taseries.pas(1534,43) Note: Local variable "YBottomI" not used > taseries.pas(1534,52) Note: Local variable "XTopI" not used > taseries.pas(1534,58) Note: Local variable "YTopI" not used > tagraph.pas(176,28) Hint: Parameter "Sender" not used > tagraph.pas(151,28) Hint: Parameter "Sender" not used > tagraph.pas(96,28) Hint: Parameter "Sender" not used > tagraph.pas(125,28) Hint: Parameter "Sender" not used > tagraph.pas(950,4) Note: Local variable "MySerie" not used > tagraph.pas(335,28) Hint: Parameter "Sender" not used > tagraph.pas(1107,55) Hint: Local variable "YTemp" does not seem to be > initialized > tagraph.pas(1231,52) Hint: Local variable "XTemp" does not seem to be > initialized > tagraph.pas(1834,4) Note: Local variable "Rgn" not used > tagraph.pas(1835,4) Note: Local variable "p" not used > tagraph.pas(1872,4) Note: Local variable "j" not used > tagraph.pas(1872,6) Note: Local variable "k" not used > tagraph.pas(1873,14) Note: Local variable "Xg" not used > tagraph.pas(1873,17) Note: Local variable "Yg" not used > tagraph.pas(1910,4) Note: Local variable "j" not used > tagraph.pas(1910,6) Note: Local variable "k" not used > tagraph.pas(1910,15) Note: Local variable "YPoint" not used > tagraph.pas(255,33) Hint: Parameter "Y" not used > tagraph.pas(1966,25) Warning: Local variable "XPoint" does not seem to > be initialized > tagraph.pas(1945,4) Note: Local variable "j" not used > tagraph.pas(1945,6) Note: Local variable "k" not used > tagraph.pas(1946,14) Note: Local variable "Xg" not used > tagraph.pas(1946,17) Note: Local variable "Yg" not used > tagraph.pas(256,31) Hint: Parameter "X" not used > tagraph.pas(281,25) Hint: Parameter "Button" not used > tagraph.pas(281,47) Hint: Parameter "Shift" not used > tagraph.pas(2056,74) Hint: Local variable "PointNumber" does not seem > to be initialized > tagraph.pas(2056,74) Hint: Local variable "SerieNumber" does not seem > to be initialized > tagraph.pas(2015,4) Note: Local variable "MySerie" is assigned but > never used tagraph.pas(282,25) Hint: Parameter "Shift" not used > tagraph.pas(283,23) Hint: Parameter "Button" not used > tagraph.pas(283,45) Hint: Parameter "Shift" not used > tagraph.pas(2224,5) Note: Local variable "i" not used > tagraph.pas(142,5) Note: Private field "TChartAxisTitle.FVisible" is > never used tachartlazaruspkg.pas(10,11) Hint: Unit "TASeries" not > used in TAChartLazarusPkg tachartlazaruspkg.pas(10,21) Hint: Unit > "TAEngine" not used in TAChartLazarusPkg 4121 lines compiled, 0.8 sec > 6 warning(s) issued > 47 hint(s) issued > 66 note(s) issued > "Compiling package TAChartLazarusPkg 0.0" completed > TPkgManager.SaveAutoInstallDependencies A TAChartLazarusPkg > TPkgManager.SaveAutoInstallDependencies A rx > CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386 > TMainIDE.DoSaveAll > TMainIDE.DoSaveProject End > CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386 > [TExternalToolList.Run] CmdLine="/usr/bin/make ide -w" > WorkDir="/home/matt/Programs/lazarus/" > make: Entering directory `/home/matt/Programs/lazarus' > Makefile:3403: warning: overriding commands for target `examples' > Makefile:3363: warning: ignoring old commands for target `examples' > /usr/bin/make -C ide ide > make[1]: Entering directory `/home/matt/Programs/lazarus/ide' > /usr/bin/make --assume-new=lazarus.pp lazarus > make[2]: Entering directory `/home/matt/Programs/lazarus/ide' > /usr/bin/ppc386 -gl -Fu../lcl/units/i386-linux > -Fu../lcl/units/i386-linux/gtk2 > -Fu../components/codetools/units/i386-linux > -Fu../components/synedit/units/i386-linux -Fu../components/custom > -Fu../components/mpaslex -Fu../ideintf/units/i386-linux -Fu../designer > -Fu../designer/jitform/units/i386-linux -Fu../debugger -Fu../converter > -Fu../packager -Fu../packager/units/i386-linux -Fu../units/i386-linux > -Fu. -Fu/usr/lib/fpc/2.2.0/units/i386-linux/rtl > -Fu/usr/lib/fpc/2.2.0/units/i386-linux/regexpr -Fiinclude > -Fiinclude/linux -Fi../images -FE.. -FU../units/i386-linux > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 -Fl/usr/local/lib > -Fl//usr//lib/opengl/nvidia/lib -Fl/usr/i686-pc-linux-gnu/lib > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.2.1 > -Fl/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6 -Fl/usr/lib/nspr > -Fl/usr/lib/nss -Fl/usr/lib/qt4 -Fl/usr/kde/3.5/lib -Fl/usr/qt/3/lib > -Fl/usr/games/lib -Fl/usr/lib/bibblelabs/bibblepro/libs > -Fl/usr/lib/fltk-1.1 -Cn -di386 lazarus.pp > Free Pascal Compiler version 2.2.0 [2007/09/20] for i386 > Copyright (c) 1993-2007 by Florian Klaempfl > Target OS: Linux for i386 > Compiling lazarus.pp > lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus > GetMsgLineFilename Filename "lazarus.pp" not found. > TExternalToolList.Run Exception: > /home/matt/Programs/lazarus/ide/lazarus.pp(74,11) Fatal: Can't find > unit Interfaces used by Lazarus > TMainIDE.DoLoadLFM there is no LFM file for > "/home/matt/Programs/lazarus/ide/lazarus.pp" > TMainIDE.DoBuildLazarus: Build Lazarus without linking failed. > > [EMAIL PROTECTED]:~/Programs/lazarus$ ./startlazarus > > Gtk-WARNING **: Failed to load module "libgnomebreakpad.so": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > > Gtk-WARNING **: Failed to load module "libgnomebreakpad.so": > libgnomebreakpad.so: cannot open shared object file: No such file or > directory > TApplication.IconChanged - TODO: convert this message...no > implementation in gtk or win32 > NOTE: codetools config file not found - using defaults > NOTE: help options config file not found - using defaults > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208 > TManagedBreakPoints.NotifyAdd A > /home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121 > TMainIDE.DoLoadLFM A /home/matt/unit1.pas IsPartOfProject=True > SUCCESS: streaming lfm="/home/matt/unit1.lfm" > TPkgManager.DoCompilePackage A TAChartLazarusPkg 0.0 Flags=[] > TMainIDE.DoSaveAll > TMainIDE.DoSaveProject End > [TExternalToolList.Run] CmdLine="/usr/bin/ppc386 -S2cgi -OG1 -gl > -vewnhi -l -Fu../../lcl/units/i386-linux/ > -Fu../../lcl/units/i386-linux/gtk/ -Fu../../packager/units/i386-linux/ > -Fu. -FUlib/i386-linux/ -dLCL -dLCLgtk tachartlazaruspkg.pas" > WorkDir="/home/matt/Programs/lazarus/components/tachart/" > Hint: Start of reading config file /etc/fpc.cfg > Hint: End of reading config file /etc/fpc.cfg > Warning: You are using the obsolete switch -OG > Free Pascal Compiler version 2.2.0 [2007/09/20] for i386 > Copyright (c) 1993-2007 by Florian Klaempfl > Target OS: Linux for i386 > Compiling tachartlazaruspkg.pas > tachartlazaruspkg.pas(10,11) Hint: Unit "TASeries" not used in > TAChartLazarusPkg tachartlazaruspkg.pas(10,21) Hint: Unit "TAEngine" > not used in TAChartLazarusPkg 21 lines compiled, 1.2 sec > 1 warning(s) issued > 4 hint(s) issued > "Compiling package TAChartLazarusPkg 0.0" completed > TGtkWSCustomMemo.CreateHandle > TGtkWSCustomMemo.CreateHandle > CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386 > TMainIDE.DoSaveAll > TMainIDE.DoSaveProject End > CreateBuildLazarusOptions NewTargetOS=linux NewTargetCPU=i386 > [TExternalToolList.Run] CmdLine="/usr/bin/make ide -w" > WorkDir="/home/matt/Programs/lazarus/" > make: Entering directory `/home/matt/Programs/lazarus' > Makefile:3403: warning: overriding commands for target `examples' > Makefile:3363: warning: ignoring old commands for target `examples' > /usr/bin/make -C ide ide > make[1]: Entering directory `/home/matt/Programs/lazarus/ide' > /usr/bin/make --assume-new=lazarus.pp lazarus > make[2]: Entering directory `/home/matt/Programs/lazarus/ide' > /usr/bin/ppc386 -gl -Fu../lcl/units/i386-linux > -Fu../lcl/units/i386-linux/gtk2 > -Fu../components/codetools/units/i386-linux > -Fu../components/synedit/units/i386-linux -Fu../components/custom > -Fu../components/mpaslex -Fu../ideintf/units/i386-linux -Fu../designer > -Fu../designer/jitform/units/i386-linux -Fu../debugger -Fu../converter > -Fu../packager -Fu../packager/units/i386-linux -Fu../units/i386-linux > -Fu. -Fu/usr/lib/fpc/2.2.0/units/i386-linux/rtl > -Fu/usr/lib/fpc/2.2.0/units/i386-linux/regexpr -Fiinclude > -Fiinclude/linux -Fi../images -FE.. -FU../units/i386-linux > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 -Fl/usr/local/lib > -Fl//usr//lib/opengl/nvidia/lib -Fl/usr/i686-pc-linux-gnu/lib > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.1.2 > -Fl/usr/lib/gcc/i686-pc-linux-gnu/4.2.1 > -Fl/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.6 -Fl/usr/lib/nspr > -Fl/usr/lib/nss -Fl/usr/lib/qt4 -Fl/usr/kde/3.5/lib -Fl/usr/qt/3/lib > -Fl/usr/games/lib -Fl/usr/lib/bibblelabs/bibblepro/libs > -Fl/usr/lib/fltk-1.1 -Cn -di386 lazarus.pp > Free Pascal Compiler version 2.2.0 [2007/09/20] for i386 > Copyright (c) 1993-2007 by Florian Klaempfl > Target OS: Linux for i386 > Compiling lazarus.pp > lazarus.pp(74,11) Fatal: Can't find unit Interfaces used by Lazarus > GetMsgLineFilename Filename "lazarus.pp" not found. > TExternalToolList.Run Exception: > /home/matt/Programs/lazarus/ide/lazarus.pp(74,11) Fatal: Can't find > unit Interfaces used by Lazarus > TMainIDE.DoLoadLFM there is no LFM file for > "/home/matt/Programs/lazarus/ide/lazarus.pp" > TMainIDE.DoBuildLazarus: Build Lazarus without linking failed. > TMainIDE.DoCloseEditorFile A PageIndex=1 > TMainIDE.DoCloseEditorFile end > TMainIDE.DoCloseEditorFile A PageIndex=0 > TCustomFormEditor.DeleteComponent Form1:TForm1 IsJITComponent=True > FreeComponent=True > TCustomFormEditor.DeleteComponent Button1:TButton IsJITComponent=False > FreeComponent=True > TMainIDE.DoCloseEditorFile end > LAZARUS END - cleaning up ... > [TMainIDE.Destroy] A > TManagedBreakPoints.NotifyRemove A > /home/matt/OpSim/trunk/src/engine/thermo/FlashRachRice.pas 121 0 > TManagedBreakPoints.NotifyRemove A > /home/matt/OpSim/trunk/src/test/FlashTest/actualflash.pas 208 0 > TManagedBreakPoints.NotifyRemove A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 978 0 > TManagedBreakPoints.NotifyRemove A > /home/matt/OpSim/trunk/src/engine/thermo/Equilibrium.pas 908 0 > [TMainIDE.Destroy] B -> inherited Destroy... TMainIDE > [TMainIDE.Destroy] END > > _________________________________________________________________ > To unsubscribe: mail [EMAIL PROTECTED] with > "unsubscribe" as the Subject > archives at http://www.lazarus.freepascal.org/mailarchives _________________________________________________________________ To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe" as the Subject archives at http://www.lazarus.freepascal.org/mailarchives
