Hi, > The current lcms measurement tool does not support it. Is the support > of the HCT target > just a question of the measuremen tool?
To support any new target, you need two things: a) The IT8 reference sheet from the target manufacturer b) A picker template to specify patches layout for measurement tool. a) is usually available from all vendors, and b) can be done with a little patience. If you take a look on "templates" directory, there are the definitions of target layouts, as *.ITX Measurement tool does read these files to generate the pick shapes. Templates are very alike IT8 files, they are human-readable and instead of Lab colors, they have patch sizes. Coordinates are given in 0..65535 domain, measurement tool does resize them to suitable values depending on resolution Regards, Marti. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, February 06, 2003 11:52 PM Subject: [Lcms-user] Hutch Color Scanner Calibration Target > Hello, > > I just found the HCT scanner calibration target. It is a new high > precision scanner target. > More info under http://www.hutchcolor.com/hct.htm > > The current lcms measurement tool does not support it. Is the support > of the HCT target > just a question of the measuremen tool? > > Regards > Juergen > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > _______________________________________________ > Lcms-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/lcms-user > > ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Lcms-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/lcms-user
