Yes, I did get it working ... then I hit another snag. I would check your tftp directory and make sure the permissions are correct and that the tftp domain is setup to run correctly on your install server. Mine is set to:
drwxr-xr-x 2 nobody nobody 512 May 1 13:00 tftpboot I would do a little snooping on your install server to see what traffic its seeing. snoop -d **whatever** host **IP of LDOM being jumpstarted** I finally moved my Jumpstart/Install Server elements over to a Sun Blade 100 I have and deactivated rarp and bootparam on my T2000 in the Control Domain. Jumpstart kicked up after this but I hit another snag which I haven't gotten an answer back on yet. Using the Sol10u5 FCS image I can't get through some portion of the Jumpstart Boot process. The LDOM gets stuck in a NFSv3 Get Attr loop. I saw 5 files in the Jumpstart boot get hammered with NFSv3 Get Attr requests and replies constantly but with no other traffic from the LDOM. LDOM just sits there until I stop it or send it a telnet break. When I changed my bootparams file to point to my Sol10u4 install area it works just fine - No NFS issues at all. The unplumbing of e1000g0 and setup of vsw0 is still a requirement in 1.0.2 as I see it as that's the only way my LDOM would jumpstart off my Sun Blade 100 server. I just saw the reference to Octave reply to my original request just via a new thread. I'll try out his suggestion. -- This message was posted from opensolaris.org
